ainsleyclark Posted February 13, 2009 Share Posted February 13, 2009 Hi There I am a bit of a newbie to the Hackint0sh world but I was wondering if you guys could help me out. I have downloaded Kalyway 10.5.2 and have burnt it to DVD. I have also partitioned my hard drive (30 GB fat32). When I boot Kalyway up it asks me to type in -v then hit enter. After this it boots OSx86 up however there is an error which reads: "extension "com.apple.driver.applepciconfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi ccomponents" Which im guessing is pretty bad. It then boots up the installer, however when I go into disk utility my hard drive is not displayed there. My question is, how do I get the hard drive to be listed (bearing in mind im pretty clueless about kext files). And if this is impossible what version would you recommend. Is it possible to install OSx86 on an external hard drive, if so what would be the consequences. My specs are below, I have seen other people running this particular version with the HPDV6000. (I have a 200gb ATA HD). ------------------------- CPU-Z version 1.49 ------------------------- Processors Information ------------------------------------------------------------------------------------ Processor 1 (ID = 0) Number of cores 2 (max 2) Number of threads 2 (max 2) Name AMD Turion 64 X2 Mobile TL-58 Codename Tyler Specification AMD Turion 64 X2 Mobile Technology TL-58 Package Socket S1 (638) CPUID F.8.1 Extended CPUID F.68 Brand ID 2 Core Stepping Technology 65 nm Core Speed 1900.2 MHz (9.5 x 200.0 MHz) HT Link speed 800.1 MHz Stock frequency 1900 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes max FID 9.5x max VID 1.125 V Features XD, VT K8 Thermal sensor yes K8 Revision ID 6.0 Chipset ------------------------------------------------------------------------------ Northbridge NVIDIA nForce 560 rev. A2 Southbridge NVIDIA nForce 560 rev. A2 Memory Type DDR2 Memory Size 2048 MBytes Channels Dual Memory Frequency 316.7 MHz (CPU/6) CAS# 5.0 RAS# to CAS# 5 RAS# Precharge 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate 2T Memory SPD ------------------------------------------------------------------------------ DIMM #1 General Memory type DDR2 Module format SO-DIMM Manufacturer (ID) Samsung (CE00000000000000) Size 1024 MBytes Max bandwidth PC2-5300 (333 MHz) Part number M4 70T2953EZ3-CE6 Serial number 820368A7 Manufacturing date Week 33/Year 07 Attributes Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no DIMM #2 General Memory type DDR2 Module format SO-DIMM Manufacturer (ID) Samsung (CE00000000000000) Size 1024 MBytes Max bandwidth PC2-5300 (333 MHz) Part number M4 70T2953EZ3-CE6 Serial number 82036827 Manufacturing date Week 33/Year 07 Attributes Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no Timings table Frequency (MHz) 200 266 333 CAS# 3.0 4.0 5.0 RAS# to CAS# delay 3 4 5 RAS# Precharge 3 4 5 TRAS 9 12 15 TRC 12 16 20 Monitoring ------------------------------------------------------------------------------ Mainboard Model 30CF (0xEC - 0x2350) Hardware monitor ----------------------------------------------------- AMD Turion 64 X2 Mobile TL-58 hardware monitor Temperature sensor 0 77°C (169°F) [0x1F6] (Core #0) Temperature sensor 1 77°C (169°F) [0x1F6] (Core #1) Dump hardware monitor Hardware monitor ----------------------------------------------------- GeForce 7150M / nForce 630M hardware monitor Temperature sensor 0 76°C (168°F) [0x4C] (GPU Core) Dump hardware monitor DMI ------------------------------------------------------------------------------ DMI BIOS -------- vendor Hewlett-Packard version F.09 date 10/05/2007 DMI System Information ---------------------- manufacturer Hewlett-Packard product HP Pavilion dv6500 Notebook PC version Rev 1 serial CNF7330SP7 UUID 434E4637-33333053-5037001B-247F2702 DMI Baseboard ------------- vendor Quanta model 30CF revision 85.20 serial None1 Software ------------------------------------------------------------------------------ Windows Version Microsoft Windows Vista (6.0) Home Premium Edition (Build 6000) DirectX Version 10.0 Any help will be greatly appreciated. Thank you in advance. Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/ Share on other sites More sharing options...
Ayrek Posted February 13, 2009 Share Posted February 13, 2009 This sounds similar to my problem, although a bit more extreme- My hard drive and all partitions are listed, but refuse to mount. I noticed our hardware is quite different, the only similarity that stands out to me is the AMD Turion 64 processor. Do you, or anyone else, know of a common problem with that particular processor? And would that affect how the install disc sees and deals with the hard drive? Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1079717 Share on other sites More sharing options...
ainsleyclark Posted February 13, 2009 Author Share Posted February 13, 2009 I don't know of anybody that has encountered the same problem. From what I have seen on the net it inst detailed enough to perform anything. And would that affect how the install disc sees and deals with the hard drive? What do you mean? Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1079739 Share on other sites More sharing options...
Kwabenalexx Posted February 13, 2009 Share Posted February 13, 2009 I have the same problem, I'm able to partition the hard drive, set aside 20GB, for mac.I am even able to use partedmagic to partition it to hfs+ format for easy Mac installation but when i start the installation, under utilities, i cannot find my partitioned HDD.what i see is the DVD rom.Any help will be very much appreciated.Thanks...Below are my specks..i tried iAtkos4a and Jas's AMD 0Sx but still no HDD detected.. ........................................................................... Operating System: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_gdr.080917-1612) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv9500 Notebook PC BIOS: PhoenixBIOS 4.0 Release 6.1 Processor: AMD Turion 64 X2 Mobile Technology TL-58 (2 CPUs), ~1.9GHz Memory: 1982MB RAM Card name: NVIDIA GeForce 7150M / nForce 630M Manufacturer: NVIDIA Chip type: GeForce 7150M / nForce 630M DAC type: Integrated RAMDAC -------------------- Drive: C: Free Space: 19.1 GB Total Space: 86.4 GB File System: NTFS Model: TOSHIBA MK1237GSX ATA Device Drive: F: Model: Optiarc DVD RW AD-7561A ATA Device Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1079741 Share on other sites More sharing options...
ainsleyclark Posted February 14, 2009 Author Share Posted February 14, 2009 Please help! I just tried to repartition my hard drive and lost everything ... Hopefully I can get this working at the least. Any ideas? I have looked everywhere. Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1079917 Share on other sites More sharing options...
MaTaLaRaNyA Posted May 2, 2009 Share Posted May 2, 2009 Please help!I just tried to repartition my hard drive and lost everything ... Hopefully I can get this working at the least. Any ideas? I have looked everywhere. Hello, I am your same problem, unable to arrancarte graphs? I do not get it either ... if you find any solution Please post Thank you very much Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1146407 Share on other sites More sharing options...
verdant Posted May 2, 2009 Share Posted May 2, 2009 Hello, I am your same problem, unable to arrancarte graphs? I do not get it either ... if you find any solution Please post Thank you very much What is your system MOBO chipset etc.....? Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1146409 Share on other sites More sharing options...
MaTaLaRaNyA Posted May 2, 2009 Share Posted May 2, 2009 What is your system MOBO chipset etc.....? I suppose you mean this? AMD M690, AMD Hammer Version BIOS: 68YTT Ver. F.07 HP Compaq 6715s (GR768ES#ABE) Version Motherboard: 30C2 Thank you very much!!!! Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1146420 Share on other sites More sharing options...
verdant Posted May 2, 2009 Share Posted May 2, 2009 I suppose you mean this? AMD M690, AMD Hammer Version BIOS: 68YTT Ver. F.07 HP Compaq 6715s (GR768ES#ABE) Version Motherboard: 30C2 Thank you very much!!!! Your MOBO chipset is AMD M690T Chipset, i.e. SB600 Southbridge chipset contrraolling storage device e.g. your SATA HDD......so you need to install SB600/700 chipset driver........suggest LawlessPPC for AMD, iPC 10.5.6, iATKOS v4.0a for AMD which are for AMD CPU systems... OS X Disk Utility does not recognize unallocated space on a hard drive, and so the space cannot be used to create a new partition..... so, you need to pepare a primary FAT32 or NTFS partition......as with Disk Utility you can only either reformat a pre-existing partitioned volume or re-partition the entire hard drive space..... Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1146423 Share on other sites More sharing options...
MaTaLaRaNyA Posted May 2, 2009 Share Posted May 2, 2009 Your MOBO chipset is AMD M690T Chipset, i.e. SB600 Southbridge chipset contrraolling storage device e.g. your SATA HDD......so you need to install SB600/700 chipset driver........suggest LawlessPPC for AMD, iPC 10.5.6, iATKOS v4.0a for AMD which are for AMD CPU systems... OS X Disk Utility does not recognize unallocated space on a hard drive, and so the space cannot be used to create a new partition..... so, you need to pepare a primary FAT32 or NTFS partition......as with Disk Utility you can only either reformat a pre-existing partitioned volume or re-partition the entire hard drive space..... I'm consulting the hardware for everest: Standard Bios support: DMI, ACPI, PnP I'm a test the partition unparted. The hardware itself is not compatible? Instructions support for CPU: x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3 . Link to comment https://www.insanelymac.com/forum/topic/152935-kalyway-1052-not-detecting-hard-drive-error-message/#findComment-1146842 Share on other sites More sharing options...
Recommended Posts