mr-pink Posted February 10, 2009 Share Posted February 10, 2009 I'm new here... so hi everybody!! It's the first time I'm triying to install OSx86. I've just installed iDeneb v1.3 10.5.5 - with a non vanilla kernel as vanilla one doesen't work. I've tried using my two usb pen drives and none of them works (only one was mounted but when I browsed its content the system crashed), so i think usb drivers don't work properly. Anyone can help me? These are the specs of my motherboard (VIA P4VMM2 rev. 8.1) - yes I know it's a bit old! Support for Intel Pentium 4 processors with 533 MHz (133 MHz QDR) CPU Front Side Bus (FSB). Support Hyper-Threading technology AGP v2.0 compliant with 4x transfer mode compliant. DRAM interface synchronous with host CPU (133 / 100 MHz) for most flexible configuration. Optimized Shared Memory Architecture (SMA). 32/16/8 MB frame buffer using system memory. VIA P4M266A NB Supports 266 MHz 4x and 133 MHz 2x transfer modes for AD and SBA signaling. Supports 66 MHz V-Link Client interface with peak bandwidth of 266 MB/sec Integrated Fast Ethernet Controller 1/10/100 Mbit capability. Integrated USB 2.0 Controller with three root hubs and six function ports. Dual channel UltraDMA 133/100/66/33 master mode EIDE controller PCI 2.2 compliant, 32-bit 3.3V PCI interface with 5V tolerant inputs. Universal Serial Bus (USB) controller that is USB v2.0 and Enhanced Host Controller Interface (EHCI) v1.0 compatible. VT8235CD SB Supports both Advanced Configuration and Power Interface (ACPI) and legacy (APM) power management. Thank you very much. Link to comment https://www.insanelymac.com/forum/topic/152292-usb-not-working-help-me-please/ Share on other sites More sharing options...
verynice Posted February 10, 2009 Share Posted February 10, 2009 Did you try ti install the usb fix on the installation cd ? If not open pacifist or download it and use that to open your ideneb dvd, from there install the usb fix Link to comment https://www.insanelymac.com/forum/topic/152292-usb-not-working-help-me-please/#findComment-1075812 Share on other sites More sharing options...
mr-pink Posted February 10, 2009 Author Share Posted February 10, 2009 Did you try ti install the usb fix on the installation cd ?If not open pacifist or download it and use that to open your ideneb dvd, from there install the usb fix Thanks I'm trying whith pacifist. Where can I find usb fix in the iDeneb DVD? Link to comment https://www.insanelymac.com/forum/topic/152292-usb-not-working-help-me-please/#findComment-1075921 Share on other sites More sharing options...
mr-pink Posted February 11, 2009 Author Share Posted February 11, 2009 I've installed usb fix but it didn't worked. So I've tried disabling USB legacy support and USB 2.0 support from bios and now they're partially working (only as usb 1 and not eveytimes). Do you have any suggestions? Link to comment https://www.insanelymac.com/forum/topic/152292-usb-not-working-help-me-please/#findComment-1077236 Share on other sites More sharing options...
mr-pink Posted February 16, 2009 Author Share Posted February 16, 2009 bump Link to comment https://www.insanelymac.com/forum/topic/152292-usb-not-working-help-me-please/#findComment-1082266 Share on other sites More sharing options...
Recommended Posts