leoniloilo Posted August 30, 2005 Share Posted August 30, 2005 The TPM comes standard disabled. Should i enable it (in Bios) befor installing OSX86 ? Do i need the oah patch for that ? Link to comment Share on other sites More sharing options...
opiniatre Posted August 30, 2005 Share Posted August 30, 2005 Disabled Because if you install correctly ... you'll bypass tpm protection. Anyway you would need the encryption key installed inside the tpm from Apple. By the way I got it working on the same board as you d915gmh and it's working good!!! Link to comment Share on other sites More sharing options...
leoniloilo Posted August 31, 2005 Author Share Posted August 31, 2005 Disabled Because if you install correctly ... you'll bypass tpm protection. Anyway you would need the encryption key installed inside the tpm from Apple. By the way I got it working on the same board as you d915gmh and it's working good!!! <{POST_SNAPBACK}> Interesting... that they have installed an encryption key in the TPM. Thank you very much for this information. Great to hear that you were successful with your install. I'm not yet that far. i didn't know that the motherboard has this special form factor BTX. So i bought the wrong case (a standard ATX) and an Intel processor with the wrong type of fan. It's not easy here to find a BTX case. AOpen has one and another also. They have a built in "thermal volume", as the power supply is called. It's like a combination of a power supply and the fan that sits normally on top of the processor. i hope the case will be delivered end of this week - can't wait to install the Thing in the very native way... so... the only files you had to replace were OAH750(D) ? Link to comment Share on other sites More sharing options...
opiniatre Posted August 31, 2005 Share Posted August 31, 2005 i did the xplode guide http://www.xplodenet.com/blog/ i've tried that only changing the OAH750 and installing native (with the dvd) but I didn't had a usb keyboard so the osx woudn't boot ! lolll So i did the big install (pear pc - vmware - darwin - then osx on top of darwin) a couple of times before figuring out to remove the 830.kext in extensions folder so quartz would work ... Anyway it's working good ... not super fast but ok speeds ... The btx fan is bigger but you will notice that the computer is silent !!! Good luck installing ! Do it on a spare ide ... don't mess with your windows disk ... hehe or at least get a backup! Link to comment Share on other sites More sharing options...
Recommended Posts