me2621a Posted January 19, 2009 Share Posted January 19, 2009 So i installed ideneb 1.3 10.5.5 on my system the specs are amd 7750 X2 Asus M3N78-EM 750gb sata drive sata DVD Drive 8800gts 512 (oh and yes i turned the board from sata to the other thing) patches i installed AMD patch Kernel 9.2.2 nforce ATA nvinject all the ethernet drivers all the sound drivers jmacron kext here is my big problem, ill reboot the computer and it will work, ill do it 5 -10 more times not changing anything, just booting into the os then shutting down. Then ill go to reboot it. It will load the bootloader from the DVD and the grey screen with the apple will start spinning. And thats it. Appon further inspection i have found that it is not spinning the hardrive at all during this failed boot. (no HD activity at all) I didnt change anything and once this happens it doesnt boot properly until i reinstall the osx and wipe the partiion. I now have removed it and can start fresh, if anyone knows how to fix this i would be very appreciative. Oh and tried Kernel 9.4 but the problems were still there Oh and other minor problems No audio No ethernet thanks for your responses sorry i just realized i posted this in the wrong spot. Link to comment https://www.insanelymac.com/forum/topic/147928-help-big-problems-after-1055-after-install/ Share on other sites More sharing options...
Lanceomni Posted January 20, 2009 Share Posted January 20, 2009 Always boot using the boot-flag -v this will display useful information during the boot process. Write down the line it stops on and post this. You can also try: -v -f -v -f -x Link to comment https://www.insanelymac.com/forum/topic/147928-help-big-problems-after-1055-after-install/#findComment-1048972 Share on other sites More sharing options...
me2621a Posted January 20, 2009 Author Share Posted January 20, 2009 Always boot using the boot-flag -v this will display useful information during the boot process. Write down the line it stops on and post this. You can also try:-v -f -v -f -x did using -v and the last line says ERROR: FireWire unable to determine security-mode; defaulting to full-secure then the next line that showed up after 5 minuts reads AppleAHCIDiskQueueManager::setPowerState(0x3b32d00, 2 -> 1) timed out after 100158ms thanks for your response Link to comment https://www.insanelymac.com/forum/topic/147928-help-big-problems-after-1055-after-install/#findComment-1049000 Share on other sites More sharing options...
Recommended Posts