Slow LAN speed with Marvell 88E8056/88E8001

[LeJu01]

Hi,

 

I got my first Hackintosh workstation up and running, I just have a few issues and this is one of them. My gigabit LAN gives me about 10mbit transfers, this is very painfull and it ruins the project of using this machine for rendering. I tried the Marvell kext from Ideneb installer, I tried another Marvell driver I found on the forums but no luck. OSX see that this is a gigabit controller but something is wrong, any idea someone?

 

And BTW thanks everyone for the support here, I couldn't have made it without this community! Cheers!

 

Here's what system profiler says about my ethernet controller:

 

Ethernet:

  Type:	Ethernet
  Hardware:	Ethernet
  BSD Device Name:	en1
  IPv4 Addresses:	10.0.1.199
  IPv4:
  Addresses:	10.0.1.199
  Configuration Method:	DHCP
  Interface Name:	en1
  NetworkSignature:	IPv4.Router=10.0.1.1;IPv4.RouterHardwareAddress=00:1f:f3:c8:b0:7c
  Router:	10.0.1.1
  Subnet Masks:	255.255.255.0
  IPv6:
  Addresses:	2002:4800:cb9b:0000:0222:15ff:fe8d:e8b9
  Configuration Method:	Automatic
  Flags:	32832
  Interface Name:	en1
  Prefix Length:	64
  Router:	fe80:0000:0000:0000:021f:f3ff:fec8:b07c
  DNS:
  Server Addresses:	10.0.1.1
  DHCP Server Responses:
  Domain Name Servers:	10.0.1.1
  Lease Duration (seconds):	0
  DHCP Message Type:	0x05
  Routers:	10.0.1.1
  Server Identifier:	10.0.1.1
  Subnet Mask:	255.255.255.0
  Proxies:
  Exceptions List:	*.local, 169.254/16
  FTP Passive Mode:	Yes
  Ethernet:
  MAC Address:	00:22:15:8d:e8:b9
  Media Options:	Full Duplex, flow-control
  Media Subtype:	1000baseT
  ipv6_address:	2002:4800:cb9b:0000:0222:15ff:fe8d:e8b9