elektromaniak Posted December 22, 2008 Share Posted December 22, 2008 Hey guys, I am new to this OSx86 thing. I got my PC working well. I used the Leo4All V3 for the installation. I tried Leo4All 5 and Atkos 5i and I was getting a reboot everytime it was trying to boot after the install. Now My system is 10.5.2. My networking is working well, I was able to install the Titan drivers for my video card and I can now change the resolution. The only problem is that I dont have any video acceleration (very laggy at the moment) especiall when trying to play games (impossible). Here are my Specs in the graphics tab: NVIDIA Quadro FX 540: Chipset Model: NVIDIA Quadro FX 540 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x014e Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 johnniecarcinogen installer Displays: SyncMaster: Resolution: 1920 x 1200 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected I tried installing the Natit driver, but had no luck. Seems like its still using my current Titan ones. I would really appreciate your help so I can resolve this issue. I need to get this working for work, using Unity 3D game engine and I dont have or cannot afford any Mac system. If you can write down the steps or a link to another post that would be awesome. thanks a lot! Link to comment https://www.insanelymac.com/forum/topic/142326-need-help-nvidia-quadro-fx-540-install-quartz-extreme-not-supported/ Share on other sites More sharing options...
Recommended Posts