Jacl3 Posted December 13, 2008 Share Posted December 13, 2008 First of I would like to say thanks to everyone here for their help. I need to run Final Cut for school and I didn't want to have to buy another mac ontop of final cut so I bought a considerably less expensive PC and have now got almost everything working (after tons and tons of reading here) Anyway the only thing I havent been able to get working yet is my PCI Raid ATA/SATA card, physically on the card it sais ALi M5283 and when it is booting I see that too when it gives me the option to configure raid. I have been dowloading kext after kext of different possible ata controllers and putting in the vendor ID and hardware ID of this card but no luck, the best I'v got id disk utility showing me a drive is connected, but it can not read it or write to it. I used DPCI Manager and it told me my card information as follows 10b9:5228 ALi Corporation M5228 ALi ATA/RAID Controller 10b9:5281 ALi Corporation ALi M5281 Serial ATA / RAID Host Controller So the part I have been added to the KEXT is 0x10b95228 and 0x522810b9 under PATA and 0x10b95281 0x528110b9 under SATA. I have tried this in the AppleVIAKext and the nforce kext and an ALi kext but still no luck. If I need a new card I can deal with that but I was wondering if anyone could help me out, or offer suggestions on another card. Link to comment https://www.insanelymac.com/forum/topic/140804-got-everything-working-except-my-ali-sataata-card/ Share on other sites More sharing options...
Dream Sequencer Posted January 10, 2010 Share Posted January 10, 2010 i'm also searching for a kext for this Ali M5281 controller... but i see there is no luck Link to comment https://www.insanelymac.com/forum/topic/140804-got-everything-working-except-my-ali-sataata-card/#findComment-1381311 Share on other sites More sharing options...
Recommended Posts