Ok so I might be retarded Help me with Kalyway

[MrHaynes]

Im having Issues. but before i get started

 

Here is what I have for a system ala CPU-Z

 

I have the Kalyway Dist 10.5.2 intel/amd disk

 

CPU-Z 1.48 report file

Processor(s)

Number of processors 1

Number of cores 4 per processor

Number of threads 4 per processor

 

Name AMD Phenom X4 9950 Black Edition

Code Name Agena

Specification AMD Phenom 9950 Quad-Core Processor

Package Socket AM2+ (940)

Family/Model/Stepping F.2.3

Extended Family/Model 10.2

Brand ID 11

Core Stepping DR-B3

Technology 65 nm

Core Speed 2874.8 MHz

Multiplier x Bus speed 14.0 x 205.3 MHz

HT Link speed 2053.4 MHz

Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64

L1 Data cache (per processor) 4 x 64 KBytes, 2-way set associative, 64-byte line size

L1 Instruction cache (per processor) 4 x 64 KBytes, 2-way set associative, 64-byte line size

L2 cache (per processor) 4 x 512 KBytes, 16-way set associative, 64-byte line size

L3 cache (per processor) 2 MBytes, 32-way set associative, 64-byte line size

Chipset & Memory

Northbridge AMD 790FX rev. 00

Southbridge ATI SB600 rev. 00

Graphic Interface PCI-Express

PCI-E Link Width x16

PCI-E Max Link Width x16

Memory Type DDR2

Memory Size 8192 MBytes

Memory Frequency 205.3 MHz (1:1)

CAS# Latency (tCL) 5.0 clocks

RAS# to CAS# (tRCD) 3 clocks

RAS# Precharge (tRP) 3 clocks

Cycle Time (tRAS) 9 clocks

Bank Cycle Time (tRC) 12 clocks

Command Rate (CR) 2T

System

System Manufacturer MICRO-STAR INTERANTIONAL CO.,LTD

System Name MS-7376

System S/N To Be Filled By O.E.M.

Mainboard Vendor MICRO-STAR INTERANTIONAL CO.,LTD

Mainboard Model MS-7376

BIOS Vendor American Megatrends Inc.

BIOS Version V1.4

BIOS Date 03/12/2008

Memory SPD

Module 1 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair

Module 2 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair

Module 3 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair

Module 4 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair

Software

Windows Version Microsoft Windows Vista (6.0) Ultimate Edition (Build 6000)

DirectX Version 10.0

 

MoBo is MSI K9A2 Platinum and video card is Visiontek 4870 512mb

 

In addition I have a hdd set aside to install to

but all i seem to get is it gets to darwin if i hit f8 all i see is the dvd drive and no hdd to work off of

 

i know that this has been posted before but im thinking that the issue may lie in the hardware being too new if that isnt right feel free to flame

 

when i go to get to installer it gets just a bit past the initial HFS lines first 3 or 4 maybe not 15 seconds later it just restarts my rig

 

i have tried vanilla command but im pretty sure thats only after you install as well as -x -s- f <--- ?

 

i dont know what im doing wrong PLEASE for the love of god (or who ever you deify) help!!!

 

Sean