grc Posted November 19, 2008 Share Posted November 19, 2008 I've got Leo running on this configuration: Gigabyte GA-73PVM-S2H NForce 630i Intel Pentium Dual Core 2180 2GHz 2GB DDR2 SDRAM NVidia GeForce 8500 GT 256MB with NVInject Booting from external USB HDD Kalyway 10.5.2 with nforcekernel This setup has some issues. The screen goes blue when changing resolutions but you can work around that using Cmd-Opt-Eject. More seriously, the thing hangs when using the onboard LAN. The link comes up at 1000M but soon afterwards the system will SPOD and that's your lot until you reboot. I'm using this driver for the LAN: http://forum.insanelymac.com/index.php?act...st&id=37188 0.62.3n beta_osx nForceLAN_0.62.3.kext.zip More worryingly I get spontaneous reboots when trying to run the lspci part of OSX86Tool to gather hardware information. I suspect the motherboard as I think all the other components are fine. Or it could be that I'm booted from USB. It'll be a few more days before I can try it on the SATA ports. What's going on with lspci? Has anyone had stability issues with the NForce 630i chipset - some folks on here seem to be using it but not widely. Link to comment https://www.insanelymac.com/forum/topic/137198-kalyway-leo-1052-installed-with-issues/ Share on other sites More sharing options...
grc Posted November 20, 2008 Author Share Posted November 20, 2008 bump Link to comment https://www.insanelymac.com/forum/topic/137198-kalyway-leo-1052-installed-with-issues/#findComment-972015 Share on other sites More sharing options...
Recommended Posts