omnidecay Posted November 12, 2008 Share Posted November 12, 2008 I just freshly installed ideneb 10.5 and all went fine. On first boot the gray screen appeared and just sat there for a while. Then a broken circle appeared while the loading circle just rotated. Here is a picture of the error. Please help, I have tried a ton of different configurations. Here are the specs if it helps... Mainboard : EVGA 122-CK-NF68 Chipset : nVidia nForce 680i SLI SPP Processor : Intel Core 2 Extreme QX6700 @ 2666 MHz Physical Memory : 8192 MB (4 x 2048 DDR2-SDRAM ) Video Card : ATI Technologies Inc ATI Radeon HD 4650 Hard Disk : ST3500630AS (500 GB) Hard Disk : ST3500630AS (500 GB) DVD-Rom Drive : SONY DVD RW DRU-830A DVD-Rom Drive : DEXKHS LQFG5UNKT2 SCSI CdRom Device DVD-Rom Drive : MagicISO Virtual DVD-ROM0000 Monitor Type : Samsung SyncMaster - 22 inches Network Card : Broadcom Corp BCM4309 802.11a/b/g Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 DirectX : Version 9.0c (June 2008) Link to comment https://www.insanelymac.com/forum/topic/135975-picture-of-ideneb-error/ Share on other sites More sharing options...
axhi Posted November 12, 2008 Share Posted November 12, 2008 i was getting that too Unfortunately I can't be of much help to you because I decided to just give up on 1.3. What I did read for your situation was to try and switch to IDE instead of AHCI and make sure you install those fixes and what not. Give that a go, look through the customize menu really well and make sure you don't see anything you might want in there!! Link to comment https://www.insanelymac.com/forum/topic/135975-picture-of-ideneb-error/#findComment-963187 Share on other sites More sharing options...
Recommended Posts