Jump to content
7 posts in this topic

Recommended Posts

Hello all,

 

Here are my system specs:

 

ASUS M2N32-SLI Deluxe

AMD Athlon 64 X2 6000+

nVidia GeForce 7600 GT

 

For users with a similar system, here's what will get the system up and running:

 

Use iDeneb v1.3 (Leopard 10.5.5) and check the following options:

AMD Fix

Kernel 9.4.0 StageXNU

Chipset AppleNForceATA Test

nvInject 0.2.1 (select your specific nVidia card's RAM size)

 

This should get you up and running well; everything including firewire works, except for networking. I can't seem to get ethernet working. I found this post which claims to have drivers that work:

 

http://forum.insanelymac.com/index.php?sho...;show=&st=0

 

However, I can't seem to get them working; I've tried everything. Can anyone clue me in on how to get ethernet working for my board?

 

Thanks,

Jason

 

 

Is that the delux edition mobo if it is the built in wireless work nativly with the 8187 kext

 

Thanks, its420, I recently figured that out and at least have networking now. Still, though, it would be nice if I could get ethernet...

I have the same motherboard and have used the kext in that thread. I had to switch off my system and unplug the PSU then hit the power button a couple of times to drain any residual power. After this I switched my system back on and I had fully working ethernet.

 

Hope this helps ya buddy

 

Hello all,

 

Here are my system specs:

 

ASUS M2N32-SLI Deluxe

AMD Athlon 64 X2 6000+

nVidia GeForce 7600 GT

 

For users with a similar system, here's what will get the system up and running:

 

Use iDeneb v1.3 (Leopard 10.5.5) and check the following options:

AMD Fix

Kernel 9.4.0 StageXNU

Chipset AppleNForceATA Test

nvInject 0.2.1 (select your specific nVidia card's RAM size)

 

This should get you up and running well; everything including firewire works, except for networking. I can't seem to get ethernet working. I found this post which claims to have drivers that work:

 

http://forum.insanelymac.com/index.php?sho...;show=&st=0

 

However, I can't seem to get them working; I've tried everything. Can anyone clue me in on how to get ethernet working for my board?

 

Thanks,

Jason

 

 

Thanks, doktaphex, I tried that but it sounds like I wasn't as thorough as you; I'll give it another shot.

 

I have the same motherboard and have used the kext in that thread. I had to switch off my system and unplug the PSU then hit the power button a couple of times to drain any residual power. After this I switched my system back on and I had fully working ethernet.

 

Hope this helps ya buddy

×
×
  • Create New...