Jump to content

Iatokos 1.0ir2 + p5n-e sli + bootfix + hard drive query


Vicki
 Share

2 posts in this topic

Recommended Posts

Right ave having some majors problems at the moment.

 

spec

 

asus p5n-e sli bios 1101.

4gb kingston ram

intel q6600

bfg nvidia 8800gts 640mb.

 

 

 

 

install iatokos 1.0ir2 with 

 

nvidia patch for nject 640 and the fix for the nvidia 8800 cards

installed with efi/emi bootloader

didnt put any network or sound

 

left any thing ele i was not sure about off

 

then installed it 

 

formatted mt disk mac os extended

 

it could only see my hard drive being 128gb

 

 

 

and then i get the blinking curssor i have tired to do fdisk for thebootfix ect but i dont know what drive i need to do it with as diskutil list

 

shows dev/disk0 to dev/disk6

 

i have 1 rom drive plugged in and one ide hard drive nothing else is plugged in also i have the usb drive that it requries to do the boofitx

 

 

 

is there a new version out there that does the bootfix for me automaticly as am sstruggling to do this and its begging to get annoying

Link to comment
Share on other sites

Right ave having some majors problems at the moment.

 

spec

 

asus p5n-e sli bios 1101.

4gb kingston ram

intel q6600

bfg nvidia 8800gts 640mb.

 

 

 

 

install iatokos 1.0ir2 with

 

nvidia patch for nject 640 and the fix for the nvidia 8800 cards

installed with efi/emi bootloader

didnt put any network or sound

 

left any thing ele i was not sure about off

 

then installed it

 

formatted mt disk mac os extended

 

it could only see my hard drive being 128gb

 

 

 

and then i get the blinking curssor i have tired to do fdisk for thebootfix ect but i dont know what drive i need to do it with as diskutil list

 

shows dev/disk0 to dev/disk6

 

i have 1 rom drive plugged in and one ide hard drive nothing else is plugged in also i have the usb drive that it requries to do the boofitx

 

 

 

is there a new version out there that does the bootfix for me automaticly as am sstruggling to do this and its begging to get annoying

 

1) Check your BIOS settings against the Bios template in my Series 7 topic post #1......I have not had time to do a similar template for my pre-Series 7 MOBOs topic yet......but I suspect the BIOS parameters and their options will match up sufficiently with those in the template to serve a useful double-check.....

 

2) Suggest you start with Kalyway 10.5.2 or JaS 10.5.4 (patched for nForce) etc.......see my blog guide....but with your fixes for your GFX card......

 

Let me know how you get on....... ;)

Link to comment
Share on other sites

 Share

×
×
  • Create New...