steffx Posted October 21, 2008 Share Posted October 21, 2008 Hi there, i had a very good working hackintosh based on iDeneb v1.3 (10.5.5). I used xnu-dev kernel 2c-beta as the default kernel, as it was working fine and i am running a vmware. Then i decided to change NVKush against EFI-Strings and messed something up and the system did not boot anymore. So I decided to make a restore from Time Maschine. The restore runs well, but as I was trying to boot i got the boot0: error. After searching the Forum i was trying to boot my OSX from the IDeneb-DVD using "rd=disk0s2 -v" to repair the bootloader. The System starts booting but after a while I see "CPU halted" and the hackintosh is switched off :-( Any help out there ? thanxx steffx Link to comment https://www.insanelymac.com/forum/topic/132349-boot0-error-after-time-maschine-restore/ Share on other sites More sharing options...
lord_muad_dib Posted October 21, 2008 Share Posted October 21, 2008 reinstall chameleon Link to comment https://www.insanelymac.com/forum/topic/132349-boot0-error-after-time-maschine-restore/#findComment-938539 Share on other sites More sharing options...
steffx Posted October 21, 2008 Author Share Posted October 21, 2008 reinstall chameleon hi good idea, but how ? I know i can do it like this: 1. put in your install-dvd2. boot with option "rd=disk0s2 -v" (if disk0s2 ist your idneb installation) 3. open terminal and type : curl -O http://www.zef.hu/mac/chameleon/1.0.12/boot1h sudo dd if=path/to/fixed/boot1h of=/dev/rdisk0s2 bs=512 count=2 4. reboot and enjoy i did this before when i restored from an old image. But as i decribed i can not do step2 after restoring from TM. steffx Link to comment https://www.insanelymac.com/forum/topic/132349-boot0-error-after-time-maschine-restore/#findComment-938603 Share on other sites More sharing options...
Recommended Posts