steffx Posted October 21, 2008 Share Posted October 21, 2008 Hi there, i had a very good working hackintosh based on iDeneb v1.3 (10.5.5). I used xnu-dev kernel 2c-beta as the default kernel, as it was working fine and i am running a vmware. Then i decided to change NVKush against EFI-Strings and messed something up and the system did not boot anymore. So I decided to make a restore from Time Maschine. The restore runs well, but as I was trying to boot i got the boot0: error. After searching the Forum i was trying to boot my OSX from the IDeneb-DVD using "rd=disk0s2 -v" to repair the bootloader. The System starts booting but after a while I see "CPU halted" and the hackintosh is switched off :-( Any help out there ? thanxx steffx Link to comment Share on other sites More sharing options...
lord_muad_dib Posted October 21, 2008 Share Posted October 21, 2008 reinstall chameleon Link to comment Share on other sites More sharing options...
steffx Posted October 21, 2008 Author Share Posted October 21, 2008 reinstall chameleon hi good idea, but how ? I know i can do it like this: 1. put in your install-dvd2. boot with option "rd=disk0s2 -v" (if disk0s2 ist your idneb installation) 3. open terminal and type : curl -O http://www.zef.hu/mac/chameleon/1.0.12/boot1h sudo dd if=path/to/fixed/boot1h of=/dev/rdisk0s2 bs=512 count=2 4. reboot and enjoy i did this before when i restored from an old image. But as i decribed i can not do step2 after restoring from TM. steffx Link to comment Share on other sites More sharing options...
Recommended Posts