Jump to content

LEO4ALL V3 on ACER 5920G - need help


3 posts in this topic

Recommended Posts


Last week i start to read how to install osx on x86 processors.

I feel confidance on what i read and then give the step forward.

Now i have a nice dual boot vista + leo4all v3. Used easyBCD to change vista bootloader.

I also used 9.2.2 vanilla kernell.


It's very cool. It's the first time i could apreciate a mac's software. 1.5 minutes (max) to start and 10 seconds to turn off (tell microsoft to do that!!!!!... i need almost 5 minutes to boot on vista!!!)


I will buy one macbook pro (new), but only, when they cost less than 1000€.


My ACER costs me 1290€, same identical macbook pro costs around 2600€ ??????? the diferrence is vista vs mac os leopard, hardware is almost the same.


Know regarding my issues, about leo4all v3.


- don't have sound (Realtek High Def Sound); - need help


- don't have LAN (Broadcam Netlink Gibabit Ethernet); - need help


- don't have WLAN (Intel 4965AGN); - i have tried one driver for it but that don't work. Any Idea? Need to remove this one to try another? How can i uninstall this one?


- sometimes it hangs up on boot ACPI....., this problem, i have seen, already, how it's solved. Hope i can do it.


Macintosh it's not my strong!!!i'm still a virgin!!!


About updates. Can i update online? Is there any update package for it? Witch one is it? (torrents?)



Regards from Portugal, and thanks for your help in advance.



My ACER 5920G Profile:


Processors Information


Processor 1 (ID = 0)

Number of cores 2 (max 2)

Number of threads 2 (max 2)

Name Intel Mobile Core 2 Duo T7300

Codename Merom

Specification Intel® Core2 Duo CPU T7300 @ 2.00GHz

Package Socket P (478) (platform ID = 7h)


Extended CPUID 6.F

Core Stepping E1

Technology 65 nm

Core Speed 2000.0 MHz (10.0 x 200.0 MHz)

Rated Bus speed 800.0 MHz

Stock frequency 2000 MHz

Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T

L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size

L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size

L2 cache 4096 KBytes, 16-way set associative, 64-byte line size

FID/VID Control yes

FID range 6.0x - 10.0x

max VID 1.363 V

Features XD, VT





Northbridge Intel PM965 rev. C0

Southbridge Intel 82801HBM (ICH8-ME) rev. 03

Graphic Interface PCI-Express

PCI-E Link Width x16

PCI-E Max Link Width x16

Memory Type DDR2

Memory Size 2048 MBytes

Channels Dual (Symmetric)

Memory Frequency 333.3 MHz (3:5)

CAS# 5.0

RAS# to CAS# 5

RAS# Precharge 5

Cycle Time (tRAS) 15


Memory SPD



DIMM #1 #2



Memory type DDR2

Module format SO-DIMM

Manufacturer (ID) Hyundai Electronics (AD00000000000000)

Size 1024 MBytes + 1024 MBytes

Max bandwidth PC2-5300 (333 MHz)

Part number HYMP512S64CP8-Y5 + xxxxxxxxxxx

Serial number 00007233 + xxxxxxxxxxxxx

Manufacturing date Week 19/Year 07



Number of banks 2

Data width 64 bits

Correction None

Nominal Voltage 1.80 Volts

EPP no

XMP no


Timings table

Frequency (MHz) 200 266 333

CAS# 3.0 4.0 5.0

RAS# to CAS# delay 3 4 5

RAS# Precharge 3 4 5

TRAS 9 12 15

TRC 12 16 20






Mainboard Model Chapala (0x2AA - 0x758FE1)




Vendor NS

Vendor ID 0xFF02

Chip ID 0xFC

Revision ID 0x65

Config Mode I/O address 0x2E



Hardware monitor



Intel Mobile Core 2 Duo T7300 hardware monitor


Temperature sensor 0 65°C (148°F) [0x23] (core #0)

Temperature sensor 1 63°C (145°F) [0x25] (core #1)


Dump hardware monitor




Hardware monitor



GeForce 8600M GT hardware monitor


Temperature sensor 0 59°C (138°F) [0x3B] (GPU Core)


Dump hardware monitor


Link to comment
Share on other sites


  • Create New...