Jump to content

Unable to see Partitions in Disk Utility


1 post in this topic

Recommended Posts



I'm using the iDeneb v1.1 DVD. I have Vista install and I shrunk my main partition, leaving 15GB of unallocated diskspace the Leopard install. For some reason when I bring up the Disk utility in iDeneb, it doesn't list any of my partitions. I've tried formatting the unallocated space to FAT32, no luck.



CPU-Z 1.47 report file



Number of processors 1

Number of cores 2 per processor

Number of threads 2 per processor

Name AMD Turion 64 X2 Mobile TL-60

Code Name Tyler

Specification AMD Turion™ 64 X2 TL-60

Package Socket S1 (638)

Family/Model/Stepping F.8.2

Extended Family/Model F.68

Brand ID 2

Core Stepping

Technology 65 nm

Core Speed 2000.2 MHz

Multiplier x Bus speed 10.0 x 200.0 MHz

HT Link speed 800.1 MHz

Stock frequency 2000 MHz

Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64

L1 Data cache (per processor) 2 x 64 KBytes, 2-way set associative, 64-byte line size

L1 Instruction cache (per processor) 2 x 64 KBytes, 2-way set associative, 64-byte line size

L2 cache (per processor) 2 x 512 KBytes, 16-way set associative, 64-byte line size

Chipset & Memory

Northbridge NVIDIA nForce 560 rev. A2

Southbridge NVIDIA nForce 560 rev. A2

Memory Type DDR2

Memory Size 3072 MBytes

Memory Frequency 333.4 MHz (CPU/6)

CAS# Latency (tCL) 5.0 clocks

RAS# to CAS# (tRCD) 5 clocks

RAS# Precharge (tRP) 5 clocks

Cycle Time (tRAS) 15 clocks

Bank Cycle Time (tRC) 21 clocks

Command Rate (CR) 2T


System Manufacturer Hewlett-Packard

System Name HP Pavilion dv2700 Notebook PC

System S/N

Mainboard Vendor Wistron

Mainboard Model 30D6

BIOS Vendor Hewlett-Packard

BIOS Version F.24

BIOS Date 04/24/2008

Memory SPD

Module 1 DDR2, PC2-5300 (333 MHz), 2048 MBytes, Hyundai Electronics

Module 2 DDR2, PC2-5300 (333 MHz), 1024 MBytes, Qimonda


Windows Version Microsoft Windows Vista (6.0) Home Premium Edition Service Pack 1 (Build 6001)

DirectX Version 10.0

Link to comment
Share on other sites


  • Create New...