Jump to content

7300 go without QE/CI .


2 posts in this topic

Recommended Posts

Hi all !!


I have a little problem (for me it's a big one), I can't get Quartz Extreme and Core Image working on my hackintosh notebook.


I am using NVinjectGo 0.2.0c, in a lenovo 3000 N200 notebook.


I'm using kalyway 10.5.2 upgraded to 10.5.3, my current kernel, is 9.3.0 (if uname -r doesn't lies).


Well, the screen resolution is well detected to 1600x1050, I also can change it, but I didn't have Quartz Extreme nor Core Image, as you can see from the System Profiler output:


Graphics by NVIDIA:  

 Chipset Model:   Graphics by NVIDIA  
 Type:   Display  
 Bus:   PCIe  
 PCIe Lane Width:   x16  
 VRAM (Total):   256 MB  
 Vendor:   NVIDIA (0x10de)  
 Device ID:   0x01d7  
 Revision ID:   0x00a1  
 ROM Revision:   NVinjectGo 0.2.0c  
 Resolution:   1680 x 1050  
 Depth:   32-bit Color  
 Built-In:   Yes  
 Core Image:   Software  
 Main Display:   Yes  
 Mirror:   Off  
 Online:   Yes  
 Quartz Extreme:   Not Supported  
 QuartzGL:   Supported  
  Display Connector:  
 Status:   No display connected


Also I can't enable the vga output but this is a secondary problem, as I need CI/QE for some applications (also I need to test if I get improvements on virtual machines with them).


I had made a lot of things with no successful results, I tried different nvcaps values from http://forum.insanelymac.com/index.php?showtopic=103549 , also tried nvinstaller (choosing the go (mobile/laptop) option), and today I try NVkush. Also I modified the com.apple.Boot.plist following the http://forum.insanelymac.com/index.php?act...62&t=118990 instructions (not having the resolution dectected).


I don't know what I can do or test, I don't know if this could help but if I try to read the vga rom bios, with nvflash (under dos) I get the following error:


Identifying EEPROM ...  
  EEPROM ID (20,FF) : Unknown  
  ERROR : Supported EEPROM not found


Well that's all I can say, if you need some more info from me, please tell me it.


Thanks for your support, and best regards.

Link to comment
Share on other sites


  • Create New...