tzp2 Posted September 11, 2008 Share Posted September 11, 2008 Hi there, recently I decided to make a Hackintosh and have been trying various methods to update to 10.5.4. I have a Inspiron 9300 with a Pentium M inside. I had no problem installing the Kalyway 10.5.1 Disk on my computer but when trying to update using the Kalyway method my Ethernet port no longer works. I tried the Netkas method to no success as well. Finally I found the ideneb disk and it looked great. I downloaded and burned the disk (v1.1). It didn't work the first time so I burned it again at 1x speed. Once again I got the same error as before. The computer loads to the white apple screen and then goes into Kernel panic. I went into Verbose mode and typed up the part that I could see. Could someone help me with this? --------------------------------------------------------------------------------------------------------------------------------------- MAC Framework successfully initialized using 10485 buffer headers and 4096 cluser IO buffer headers IOAPIC: Version 0x20 Vectors 0:23 Extension "com.apple.driver.ACPI_SMC_PlatformPlugin" has immediate dependencies on both com.apple.kernle and com.apple.kpi components; use only one style. ACPI: System State [s0 S3 S4 S5J (S3) ACPI_SMC_CtrlLoop: : initCPUCtrlLoop - pmCPUControl (PMIOCSETPSTATEABLE) returned 0xffffffff Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. IOPCCardBridge: : start failed panic(cpu 0 caller 0x339C0DE0): "AppleSMCPDRC: :start - unrecognized device type\n"@/SourceCache/IOPlatformPluginFamily/IOPlatformDebugger called: <panic> Backtrace, Format - Frame : Return Address (4 potential args on stack) 0x33a3fdb8 : 0x12b0e1 (0x45833c 0x33a3fdec 0x133285 0x0) 0x33a3fe08 : 0x339c0de0 (0x339c2460 0x33c2450 0x33a3fe48 0x40baa5) 0x33a3fe48 : 0x40fd2e (0x3c81600 0x3c3980 0x1 0x3ea6c0) 0x33a3fea8 : 0x411bc3 (0x3c39d80 0x3c81600 0x3bdd280 0x0) 0x33a3ff28 :0x411427 (0x3c39d80 0x3bddb00 0x0 0xffffffff) 0x33a3ff78 : 0x4100a3 (0x3c39d80 0x0 0x33a3ffac 0x1) 0x33a3ffc8 : 0x19f3cc (0x3c38690 0x0 0x1a20b5 0x3bd0c80) Backtrace terminated-invalid frame pointer 0 Kernel loadable modules in backtrace (with dependencies): com.apple.drive.ACPI_SMC_PlatformPlugin(3.1.5d3)@0x339b9000->0x339c4fff dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x2e24d000 dependency: com.apple.iokit.IOAPCIFamily(1.2.0)@0x2e263000 dependency: com.apple.driver.IOPlatformPluginFamily(3.1.5d3)@0x3397b000 dependency: com.apple.driver.AppleSMC(2.0.1d2)@0x33998000 BSD process name corresponding to current thread: kernel_task Mac OS version: Not yet set Kernel version: Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEAS_I386 --------------------------------------------------------------------------------------------------------------------------------------- Is there anything I can do to somehow fix this? I reformatted my Hard Drive to erase the Kalyway install because I thought it might be interfering but I got the same message after the reformat. I used the Disk Utility tool on the Kalyway disk to make a journaled MacOSX Hard Drive. Should I have done something else? Thanks to anyone who can suggest anything! Link to comment https://www.insanelymac.com/forum/topic/125446-ideneb-installation-goes-into-kernel-panic/ Share on other sites More sharing options...
verdant Posted September 11, 2008 Share Posted September 11, 2008 Hi there, recently I decided to make a Hackintosh and have been trying various methods to update to 10.5.4. I have a Inspiron 9300 with a Pentium M inside. I had no problem installing the Kalyway 10.5.1 Disk on my computer but when trying to update using the Kalyway method my Ethernet port no longer works. I tried the Netkas method to no success as well. Finally I found the ideneb disk and it looked great. I downloaded and burned the disk (v1.1). It didn't work the first time so I burned it again at 1x speed. Once again I got the same error as before. The computer loads to the white apple screen and then goes into Kernel panic. I went into Verbose mode and typed up the part that I could see. Could someone help me with this? --------------------------------------------------------------------------------------------------------------------------------------- MAC Framework successfully initialized using 10485 buffer headers and 4096 cluser IO buffer headers IOAPIC: Version 0x20 Vectors 0:23 Extension "com.apple.driver.ACPI_SMC_PlatformPlugin" has immediate dependencies on both com.apple.kernle and com.apple.kpi components; use only one style. ACPI: System State [s0 S3 S4 S5J (S3) ACPI_SMC_CtrlLoop: : initCPUCtrlLoop - pmCPUControl (PMIOCSETPSTATEABLE) returned 0xffffffff Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. IOPCCardBridge: : start failed panic(cpu 0 caller 0x339C0DE0): "AppleSMCPDRC: :start - unrecognized device type\n"@/SourceCache/IOPlatformPluginFamily/IOPlatformDebugger called: <panic> Backtrace, Format - Frame : Return Address (4 potential args on stack) 0x33a3fdb8 : 0x12b0e1 (0x45833c 0x33a3fdec 0x133285 0x0) 0x33a3fe08 : 0x339c0de0 (0x339c2460 0x33c2450 0x33a3fe48 0x40baa5) 0x33a3fe48 : 0x40fd2e (0x3c81600 0x3c3980 0x1 0x3ea6c0) 0x33a3fea8 : 0x411bc3 (0x3c39d80 0x3c81600 0x3bdd280 0x0) 0x33a3ff28 :0x411427 (0x3c39d80 0x3bddb00 0x0 0xffffffff) 0x33a3ff78 : 0x4100a3 (0x3c39d80 0x0 0x33a3ffac 0x1) 0x33a3ffc8 : 0x19f3cc (0x3c38690 0x0 0x1a20b5 0x3bd0c80) Backtrace terminated-invalid frame pointer 0 Kernel loadable modules in backtrace (with dependencies): com.apple.drive.ACPI_SMC_PlatformPlugin(3.1.5d3)@0x339b9000->0x339c4fff dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x2e24d000 dependency: com.apple.iokit.IOAPCIFamily(1.2.0)@0x2e263000 dependency: com.apple.driver.IOPlatformPluginFamily(3.1.5d3)@0x3397b000 dependency: com.apple.driver.AppleSMC(2.0.1d2)@0x33998000 BSD process name corresponding to current thread: kernel_task Mac OS version: Not yet set Kernel version: Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEAS_I386 --------------------------------------------------------------------------------------------------------------------------------------- Is there anything I can do to somehow fix this? I reformatted my Hard Drive to erase the Kalyway install because I thought it might be interfering but I got the same message after the reformat. I used the Disk Utility tool on the Kalyway disk to make a journaled MacOSX Hard Drive. Should I have done something else? Thanks to anyone who can suggest anything! Check here.......and here......it could be your choice of kernel as I believe the Pentium M is SSE2 only....so check here too.... Link to comment https://www.insanelymac.com/forum/topic/125446-ideneb-installation-goes-into-kernel-panic/#findComment-886890 Share on other sites More sharing options...
Recommended Posts