AD76 Posted September 10, 2008 Share Posted September 10, 2008 I have a non-boot RAID 0 setup of 2x750GB Samsung HD753L SATA drives connected to a PCI-X Highpoint RocketRaid 2300. I cannot create partition, repair disk, etc in Disk Utility. As you can see in the following disk info, it cannot be written to and is locked. Any suggestions would be greatly appreciated. Name : HPT DISK 1_0 Media Type : Disk Partition Map Scheme : Unformatted Disk Identifier : disk2 Media Name : HPT DISK 1_0 Media Media Type : Generic Connection Bus : SCSI Connection ID : SCSI Target ID 0, Logical Unit 0 Device Tree : /PCI0@0/PEX1@1C,1/scsi@0/@0:0 Locked : Yes Writable : No Ejectable : No Mac OS 9 Drivers Installed : No Location : Internal Total Capacity : 1.4 TB (1,500,151,545,856 Bytes) S.M.A.R.T. Status : Not Supported Disk Number : 2 Partition Number : 0 Link to comment Share on other sites More sharing options...
Recommended Posts