Jump to content
6 posts in this topic

Recommended Posts

Im new to this site and i want to install os x leopard on my toshiba laptop..

Ok guys heres my spec's.. i just wanna know if i can install os x on it.

and which instillation should i use?

 

-Toshiba a215-s7422

 

Operating System: vista home premium

CPU Type: AMD Turion 64 X2 TL-58 1.9G

Memory Size: 2GB DDR2

Hard Disk: 250GB

Graphics Card: ATI Radeon X1200 IGP

Video Memory: shared memory

Communication: Modem, LAN and WLAN

Card slot: 1 x Express Card

 

CPU Type: AMD Turion 64 X2

CPU Speed: TL-58(1.90GHz)

CPU L2 Cache: 2 x 512KB

 

Graphics-

GPU/VPU: ATI Radeon X1200 IGP

Video Memory: (128MB-319MB) Dynamically Allocated Shared Graphics Memory

Graphic Type: Integrated Card

 

Hard Drive-

HDD: 250GB

HD RPM: 5400rpm

HD Interface: SATA

 

thanks guys!!

Link to comment
https://www.insanelymac.com/forum/topic/122157-vistaleopard-dual-boot-toshiba/
Share on other sites

Guide to triple boot XP/Vista/Mac:-

 

 

Step 1: Download Kalway Intel AMD SSE2 SSE3 10.5.1 Edition from any server.

 

Step 2: Download Acronis Disk Director Suite 10 and above (actually 2160 build) which supports Vista Note: The version you download should support Vista.

 

Step 3: Now install Acronis in Vista.

 

Step 4: Now install OS Selector from Acronis Disk Director Suite.

 

Step 5: Now decide upon the Partition where u want to Install Mac OSx.

 

Step 6: Now goto "Disk Management" and Delete that partition Note: Before that backup the stuff in that particular drive and deleting the partition does not cause any harm and don't worry.

 

Step 7:Now open cmd.exe and then type "diskpart".

 

Step 8: Type the command "list disk" or "list disks".

 

Step 9: Now select the disk in which the partition was deleted.

 

Step 10: Now type the command below "create partition primay size=xxxxxx id=af" and press enter Note: xxxxxx = size of that deleted partition, id=af indicates that the partition shud be Mac OS Jounaled Now we have created the partition for installin Mac OS

 

Step 11: Now restart the system and check whether "Acronis OS Selector" starts at boot.

 

Step 12: Now insert the Mac OSX DVD and reboot the system and change the BIOS to boot from DVD.

 

Step 13: Let the mac boot up and select the language and then in the next menu click "Continue".

 

Step 14: There will be no destination disks displayed.

 

Step 15: Open "Disk Utility" from "Utilites" Menu and select partition that we converted to MAC OS in Vista and then click Erase.

 

Step 16: It will erase the partition and mounts the partition.

 

Step 17: Now select the partition and click continue.

 

Step 18: In the install Menu on right side few check boxes would be listed, Check the components u would like to install Note: If you have AMD check "AMD" and don't check intel If u have Intel chk "Intel" and don't check AMD If your hardware is not listed in the menu don't check as it may give problems later.

 

Step 19: Now go about installing, it may take about nearly 20 mins.

 

Step 20: Then restart the system and remove the DVD.

 

Step 21: Now Acronis OS selector does not list Mac now boot into Vista and open Acronis OS Selector.

 

Step 22: Now goto OS detection wizard and select the partition in which Mac is installed.

 

Step 23: It woud add "Unknown Operating System" Entry.

 

Step 24: Now reboot and in the OS selector Menu you will have "Unknown Operating System" entry, click on that n Mac boots

 

 

Follow these steps carefully, then you will be able to successfully install Mac in ur x86 System. Now I am using XP/Vista/Mac Triple boot with Acronis OS selector

 

 

My system configuration

Intel Core 2 Duo 2.53Ghz

Intel DG33 Motherboard

  • 11 months later...
Im new to this site and i want to install os x leopard on my toshiba laptop..

Ok guys heres my spec's.. i just wanna know if i can install os x on it.

and which instillation should i use?

 

-Toshiba a215-s7422

 

Operating System: vista home premium

CPU Type: AMD Turion 64 X2 TL-58 1.9G

Memory Size: 2GB DDR2

Hard Disk: 250GB

Graphics Card: ATI Radeon X1200 IGP

Video Memory: shared memory

Communication: Modem, LAN and WLAN

Card slot: 1 x Express Card

 

CPU Type: AMD Turion 64 X2

CPU Speed: TL-58(1.90GHz)

CPU L2 Cache: 2 x 512KB

 

Graphics-

GPU/VPU: ATI Radeon X1200 IGP

Video Memory: (128MB-319MB) Dynamically Allocated Shared Graphics Memory

Graphic Type: Integrated Card

 

Hard Drive-

HDD: 250GB

HD RPM: 5400rpm

HD Interface: SATA

 

thanks guys!!

 

 

I ALREADY SUCCESS ON IT !! PERFECTLY !!

  • 8 months later...
  • 4 months later...
Can you tell us what version you used?? and also can you tell us what .kext and drivers you needed to use??

 

Just use iDeneb 10.5.8 Lite Edition, All Kext and driver we need listed there... ;)

 

Just use iDeneb 10.5.8 Lite Edition, All Kext and driver we need listed there... ;)
×
×
  • Create New...