GuruMarfi Posted August 21, 2008 Share Posted August 21, 2008 Brauche Hilfe!!! Habe ein Acer Aspire 5920G (siehe Fußnote) mit einem Intel High Definition Audio (ALC888). Bekomme die onboard Lautsprecher zum laufen und der Frontsatz (Mic, Speaker und Headphones nicht zum laufen). Habe schon den Taratuga mit linuxfile (Knoppix5.0 die auf linux korrekt lief) probiert, und hatte danach das Ergebnis, dass die onboard Lautsprecher nicht mehr gingen (wurden aber in der Audioconfig angezeigt). Hat jemand eine Idee was ich in der Info.plist der HDAudio.kext umschreiben muss um es zum laufen zu bekommen? die Linux_dump sieht so aus. Codec: Realtek ID 888 Address: 0 Vendor Id: 0x10ec0888 Subsystem Id: 0x10250121 Revision Id: 0x100101 Default PCM: rates 0x560, bits 0x0e, types 0x1 Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x03 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x04 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x05 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates 0x5e0, bits 0x1e, types 0x1 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x14 0x14] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x8b 0x8b] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital PCM: rates 0x160, bits 0x1e, types 0x1 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x19 0x19] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates 0x5e0, bits 0x1e, types 0x1 Node 0x11 [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x0810: OUT Pin Default 0x1856e130: [Jack] Digital Out at Int HDMI Conn = Digital, Color = White Pin-ctls: 0x40: OUT Connection: 1 0x10 Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0xc0: OUT HP Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0xc0: OUT HP Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0836: IN OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0836: IN OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Pin Default 0x02a19840: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Pin Default 0x99a30941: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Pin Default 0x0281304f: [Jack] Line In at Ext Front Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x40159505: [N/A] Speaker at Ext N/A Conn = Optical, Color = Pink Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x0810: OUT Pin Default 0x02451120: [Jack] SPDIF Out at Ext Front Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b Würde mich über aktive Hilfe freuen. LG GuruMarfi codec_dump.txt Link to comment https://www.insanelymac.com/forum/topic/122080-intel-highdifinition-sound-acl888/ Share on other sites More sharing options...
birhunter_99 Posted August 22, 2008 Share Posted August 22, 2008 keiner ne Idee? Link to comment https://www.insanelymac.com/forum/topic/122080-intel-highdifinition-sound-acl888/#findComment-865532 Share on other sites More sharing options...
Meowpard Posted August 22, 2008 Share Posted August 22, 2008 keiner ne Idee? hiernach soll sound OOB (out ofb ox) laufen: http://wiki.osx86project.org/wiki/index.ph...les#Aspire_5920 Acer Aspire 5920G Leopard 10.5.2 Guide: http://www.insanelymac.com/lofiversion/index.php/t97660.html Hast Du schon mal ne andere Version installiert? Leo4all soll angeblich besser auf Notebooks laufen. Kann ich nicht unbedingt bestätigen. Bei mir lief auch die iDeneb gut. Link to comment https://www.insanelymac.com/forum/topic/122080-intel-highdifinition-sound-acl888/#findComment-865554 Share on other sites More sharing options...
birhunter_99 Posted August 23, 2008 Share Posted August 23, 2008 die Links haben ich mit den GuruMarfi schon durch, es funktioniert auch so weit alles, aber ihm geht es auch um Audio-In speziel für Voip-Anwendungen Link to comment https://www.insanelymac.com/forum/topic/122080-intel-highdifinition-sound-acl888/#findComment-865906 Share on other sites More sharing options...
GuruMarfi Posted August 23, 2008 Author Share Posted August 23, 2008 Habe schon fast alle Versionen von Hackintosh durch (Jas, ToH, iAtkos R2/ v4, Kalyway, iDeneb) teilweise bekam ich die Installation hin (Hardwareabhängig), jedoch überall das selbe Problem. Nehme ich den ALC888 with Taruga Patch (iDeneb) geht der Kopfhörerausgang (mic nicht getestet) und keine onboard Lautsprecher. Nehme ich den Azalia gehen die Lautsprecher und keine Kopfhörer, Mic, Line In. Geht es nicht die beiden zu koppeln (Script ändern) oder wie oben abgebildet das Linuxscript abzuändern (unter Linux/Knoppix-Debian funzt es ja). Hat es gar etwas mit der Audio ID zu tun? Ich weiss mir keinen Rat mehr. codec7.txt Link to comment https://www.insanelymac.com/forum/topic/122080-intel-highdifinition-sound-acl888/#findComment-866083 Share on other sites More sharing options...
Recommended Posts