Jump to content
1 post in this topic

Recommended Posts

I acquired a new laptop, and i want to install mac on it, but im not sure if it will work. I would like to know what version of mac would work best, and what drivers to install, seeing as i am a mac noob.

 

 

General

Recommended UseSmall businessPlatform TechnologyIntel CentrinoSystem TypeNotebookBuilt-in DevicesKeypad , Stereo speakersWidth12.4 inDepth10.1 inHeight1.2 inWeight4.6 lbsColorGrayBundled withPort replicatorNotebook typeThin-and-light (4-6 lbs.)Wireless capabilities802.11b

Processor

ProcessorIntel Pentium M 1.80 GHzData bus speed400 MHzChipset typeIntel 855PM

Cache Memory

TypeL2 cacheCache size1 MB

RAM

Installed Size512 MB / 2 GB (max)TechnologyDDR SDRAM - 266 MHzMemory specification complianceDDR266/PC2100

Environmental Parameters

Min Operating Temperature32 °FMax Operating Temperature95 °FHumidity Range Operating10 - 90%Max Altitude Operating9840 ft

Storage Controller

Storage controller typeIDE

Storage

Floppy DriveNoneHard Drive80 GBStorage RemovableNone - NoneHard drive typePortable

Optical Storage

TypeCD-ROM - Plug-in moduleCD / DVD read speed24x

Optical Storage (2nd)

2nd optical storage typeNone

Display

Display Type14.1 TFT active matrixMax Resolution1024 x 768 ( XGA )Widescreen DisplayNoColor Support24-bit (16.7 million colors)

Video

Graphics Processor / VendorATI Mobility Radeon 9000 AGP 4xVideo MemoryDDR SDRAM - 32 MB

Audio

Audio output typeSound cardAudio output compliant standardsAC '97Audio InputMicrophone

Input Device(s)

Input device typeKeyboard, Touchpad, Track stick

Telecom

ModemFax / modem - PCIMax transfer rate56 KbpsProtocols & SpecificationsITU V.92

Networking

NetworkingNetwork adapterNetworking / Wireless LAN SupportedYesData link protocolEthernet, IEEE 802.11b, Fast Ethernet, Gigabit EthernetNetworking standardsIEEE 802.11b

Expansion / Connectivity

Expansion Bays1 x Front accessibleExpansion Slots Total (Free)2 ( 0 ) x Memory, 1 ( 1 ) x Smart Card, 1 ( 1 ) x CardBus - Type I/IIInterfaces1 x Docking / port replicator - 280 pin docking, 1 x Serial - RS-232 - 9 pin D-Sub (DB-9), 1 x Parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25), 1 x Display / video - VGA - 15 pin HD D-Sub (HD-15), 1 x Display / video - S-video output - 7 pin mini-DIN, 1 x Infrared - IrDA, 1 x Microphone - Input - Mini-phone mono 3.5 mm, 1 x Audio - Line-out/headphones - Mini-phone stereo 3.5 mm, 2 x Hi-Speed USB - 4 pin USB Type A, 1 x Modem - Phone line - RJ-11, 1 x Network - Ethernet 10Base-T/100Base-TX - RJ-45, 2 x Hi-Speed USB - 4 pin USB Type A ( On expansion base ), 1 x Keyboard - Generic - 6 pin mini-DIN (PS/2 style) ( On expansion base ), 1 x Mouse - Generic - 6 pin mini-DIN (PS/2 style) ( On expansion base ), 1 x Display / video - DVI-Analog/Digital - 29 pin combined DVI ( On expansion base ), 1 x Audio - SPDIF ( On expansion base ), 1 x Peripheral ( On expansion base )

Link to comment
https://www.insanelymac.com/forum/topic/121289-i-need-some-install-help/
Share on other sites

×
×
  • Create New...