Skandil Posted August 2, 2008 Share Posted August 2, 2008 Hello everyone, made a post before but managed to get round that problem... now I have encountered a new one. I have installed iATKOS 10.5.4 Leopard on my Intel P4 Prescott 3.2Ghz machine - I have a SATA hard drive with 3 partitions, 2 of which just just contain files. I'm not trying to dual boot, I just want OS X as my main operating system (ideally). It took me a while to get the options right, as previously it wouldn't boot Darwin / constantly restarted whenever booting Mac OS etc... I installed using the following customization options: iATKOS v4i main System Darwin Bootloader Darwin X86 for MBR (Non-EFI) Kernel 9.2.0 ToH NVinject 128mb SATA The system boots, lovely grey apple logo (gives a misleading feeling of success) and then the spinner stops. Have tried booting in safe mode etc, stops every time. After booting in verbose, it freezes after it says "Com_Apple_Driver_RTL8139: Ethernet address 00:50:8d:7b:6a:cf" I'm guessing it doesn't like my network, but I really am at a loss as to which driver I need to choose. I have tried selecting a few of the drivers (individually) on separate installations, but they don't seem to help me out here. The listed Network drivers available are: Marvell Yukon 88E8001 Realtek 8139 Intel Pro/100 VE VIA Rhine Broadcom 440x Atheros 5005eg My network is built into my motherboard, which is an Abit AS8-V. If anyone has any ideas they would be much appreciated! Many thanks! Link to comment https://www.insanelymac.com/forum/topic/118989-iatkos-v4i-install-freezes-on-boot/ Share on other sites More sharing options...
Skandil Posted August 3, 2008 Author Share Posted August 3, 2008 Bump! Link to comment https://www.insanelymac.com/forum/topic/118989-iatkos-v4i-install-freezes-on-boot/#findComment-843265 Share on other sites More sharing options...
Recommended Posts