Need Help

[fayfay392]

Hi all,

Im new here so bear with me. I have an Abit IS7 motherboard here are the specs:

CPU support Socket 478-based Intel Pentium 4 processors

Form factor ATX

Chipset Intel "Springdale" 865PE

North bridge Intel 865PE

South bridge Intel ICH5R

Interconnect Intel Accelerated Hub (266MB/sec)

PCI slots 5 32-bit/33MHz

AGP slots 1, 4X/8X AGP Pro 50 (0.8/1.5V)

AMR/CNR slots None

Memory 4 184-pin DIMM sockets

Maximum of 4GB of DDR400/333/266 SDRAM

Storage I/O Floppy disk

2 channels ATA/100

Serial ATA 2 channels Serial ATA 150 via ICH5R south bridger

RAID Serial ATA RAID 0, 1 support via ICH5R south bridge

Legacy ports 1 PS/2 keyboard, 1 PS/2 mouse, Serial and Parallel ports

USB 4 USB 2.0/1.1 ports

2 additional USB 2.0/1.1 ports via PCI expansion header

Firewire 3 IEEE 1394 Firewire via TSB43AB23 Firewire controller

Audio 6-channel audio via ICH5R/ALC650 codec

analog front, rear, and center outputs

analog line in and microphone inputs

digital S/PDIF input and output ports

Video None

Ethernet 10/100 Ethernet via 3Com controller

BIOS Abit SoftMenu

Bus speeds FSB: 100-412MHz in 1MHz increments

AGP: fixed @ 66MHz

PCI: fixed @ 33MHz

Bus dividers DRAM: 3:2, 5:4, 1:1

CPU:AGP:PCI: 3:2:1, 4:2:1, 5:2:1, 6:2:1, 7:2:1, 8:2:1, fixed

Voltages CPU: 1.500-1.875 in 0.025V increments

DRAM: 2.5-2.8V in 0.05V increments

AGP: 1.5-1.65V in 0.05V increments

Monitoring Voltage, fan status, and temperature monitoring

 

My CPU Is a P4 2.4 GHZ SSE2, now my question is i have Mac OSX 10.5.1 running and stable from the Iatkos 1.0i DVD but I would like the 10.5.2 edition or higher... I have the Iatkos 2.0i but i later found out it isn't supported on SSE2 systems...I have tried the Kalaway update to no avail... . Can anyone be so kind as to tell me which DVD i need to get this up like Leoforall etc and possibly help me a little further....? PLEASE

thanks,

Chris