fearmegod Posted March 6, 2006 Share Posted March 6, 2006 Hello, after searching for a few hours last night. Then trying many different .kext files, editing and what not. I decided to bite the bullet and hope that someone could help me specifically. I have a developers compatible motherboard (I believe). It is an ASUS P5GD1. I installed 10.4.3 8F1099 and all hardware worked natively. Full specs are: ASUS P5GD1-VM Motherboard Intel Pentium 4 630 - 3.0 ghz 512 MB DDR RAM Intel Graphics Media Accelerator 900 Intel Pro 10/100 LAN Realtek ALC861 Sound etc. My problem, like I said, is that neither my LAN or Sound work after upgrading. I followed Maxxus instructions and backed up all my 10.4.3 .kext files, so those are available to me. The full working 10.4.3 install is gone though. Under Audio in the System Profiler it says: No Built-In Audio. Under Network it says: Built-In Ethernet Type: Ethernet Hardware: Ethernet BSD Device name: en0 IPv4 Addresses: 192.168.15.45 IPv4: Adresses: 192.168.15.45 Configuration Method: Manual Router: 192.168.15.1 Subnet Masks: 255.255.255.0 IPv6: Configuration Method: Automatic DNS: Server Adresses: 192.168.15.1 I don't think the proxies are important at this point. Anyways, it confuses me because it looks like it has an address. Of course it didn't recognize the card as anything other than Built-In Ethernet. I have also tried disabling the LAN and Sound in BIOS, rebooting, then enabling them again. It says on the HCL that my LAN and Sound should work, without patching. Please help!!! Also, Under System Preferences-Network, It says The cable for the Built-In Ethernet is not plugged in. Link to comment https://www.insanelymac.com/forum/topic/11127-installed-1044-no-lan-no-sound/ Share on other sites More sharing options...
fearmegod Posted March 6, 2006 Author Share Posted March 6, 2006 I have followed the instrutions in this post: http://forum.osx86project.org/index.php?showtopic=10213 They did not work, however, I noticed that the AppleAzaliaAudio.kext says that it has dependency errors: com.apple.iokit.IOHDAudioFamily: No valid version of this dependency can be found Link to comment https://www.insanelymac.com/forum/topic/11127-installed-1044-no-lan-no-sound/#findComment-69644 Share on other sites More sharing options...
AndrésMao Posted August 15, 2006 Share Posted August 15, 2006 Hello, I have the same problem , macosx86 10.4.4/5 on my laptop is a Toshiba A105-s4064 with Realtek ALC861 and NIC Intel/Pro 100 Ve. I´ve tried all the forum's solutions,like overwriting the file AppleAzaliaAudio.kext (for Audio) and AppleIntel8255x.kext (for Ethernet) and no one works. So anybody can tell me if is possible make this items work properly??? Please help us..! Thanks Link to comment https://www.insanelymac.com/forum/topic/11127-installed-1044-no-lan-no-sound/#findComment-167006 Share on other sites More sharing options...
jjduro Posted July 6, 2007 Share Posted July 6, 2007 ALC861 needs a lot of work. These simple solutions won't work with this audiochip Link to comment https://www.insanelymac.com/forum/topic/11127-installed-1044-no-lan-no-sound/#findComment-402681 Share on other sites More sharing options...
Recommended Posts