happs42 Posted June 3, 2008 Share Posted June 3, 2008 Hi all, I am in desperate need of help with my install of iAtkos Leopard v2.0 on my Dell XPS720 System. I believe it has something to dow with my SATA hard disks but cannot be certain.(maybe a problem with my motherboard). Was wondering whether perhaps someone was successful in installing it on this system, and if so, their help would be much appreciated! Overview of my system: Motherboard Information Motherboard Model: 0P611C Motherboard Vendor: Dell Inc. Motherboard Version A00 BIOS Information BIOS Vendor Dell Inc. BIOS Version A04 BIOS Date 12/04/2007 Processor Info (from BIOS) Socket Designation Microprocessor Processor Type Central Processor Processor Family Specific Pentium Version Manufacturer Intel Procesor ID 000006FB-BFEBFBFF Supported Voltages 1.8 Volts Current Voltage 1.8 Volts External Clock 1066 MHz Maximum Speed 5200 MHz Current Speed 2400 MHz Processor Status CPU Socket Populated, Status Enabled Processor Upgrade ZIF Socket L1 Cache Handle 0x700 L2 Cache Handle 0x701 L3 Cache Handle 0x704 Processor Information (from FreshDiagnose Utility) Model Intel Pentium (6x86) Type Primary Processor Logical CPU Count 4 Vendor Intel Corporation Family 6th Generation of UMC Processors Product Code SLADL Hardcoded Name Intel® Core2 Quad CPU Q6600 @ 2.40GHz Rated Frequency 2.40 GHz Measured Frequency 2399 MHz Family/Model/Stepping 6/15/11 Bus Speed 800 MHz Bus/Core Ratio 12 L2 Cache Size 4 MB L2 Cache Speed 2.4 GHz Manufacturing Technology 65 nm Core Stepping G0 Thermal Design Power 35W Thermal Specification 100°C Address Bus Width 36 Bit Core Details 20 Entry RS, 40 Entry ROB Data Bus Width 64 Bit, Separate 64 Bit Backside L2 Cache Bus Execution Speed Up to 5 µOPs/Cycle Execution Units 2x ALU, Load, Store Address, Store Data, Pipelined FPU First Introduction Novembre 1st, 1995 Floating Point Integrated I/O Voltage 3.3 v Instruction Decoder 3x IA-32/Cycle, 6x µOPs/Cycle Instruction Set IA-32 Multimedia N/A Multiprocessing SMP, 4 Processors, using integrated local APICs Package Type Micro-FCBGA Physical Memory 2^36 Bit (64 GB) Pipeline Depth 12 (In-order) plus 2 (Out-of-order) Stages Power Management HLT, STPCLK, SMI/SMM Processor Core RISC, Out-of-order and Speculative Execution Processor Modes Real, Protected, Virtual, Paging, SMM, Probe Mode Registers 32-bit Integer, 80-bit FP, 40 Entry RAT Split Voltage Yes (Automatically determined via VID Pins) Virtual Memory 65,528 GB (~64 TB) Apic ID 2 CL Flush 8 Optical Drives - 2 SATA attached DVD drives. Hard Drives Primary 320GB Seagate Barracuda 7200.10 SATA 7200RPM Firmware 3.ADG Partitions 298GB - NTFS - My installation of Windows XP Media Centre Edition 47.03MB - FAT16 - EISA Configuration (believe this is dells diagnostic utilities) 15.69MB - unallocated space Secondary 500GB Seagate Barracuda 7200.10 SATA 7200RPM Firmware 3.ADG Partitions 465.80GB - unallocated space (this is the desired location of my Mac OSx installation The error I get when I boot the install DVD with the -v command is the following: Still waiting for root device I do apologise if this specific problem has been raised before, I have in fact searched the forums for 2 days and haven't come up with anything concrete. Thanks a million in advance for any help you can offer! (even just for having a look) - Alex Link to comment https://www.insanelymac.com/forum/topic/108492-help-installing-iatkos-v20i-on-dell-xps-720/ Share on other sites More sharing options...
happs42 Posted June 5, 2008 Author Share Posted June 5, 2008 no suggestions guys? thanks to those who have looked, appreciated Link to comment https://www.insanelymac.com/forum/topic/108492-help-installing-iatkos-v20i-on-dell-xps-720/#findComment-771651 Share on other sites More sharing options...
Recommended Posts