KWODO Posted May 31, 2008 Share Posted May 31, 2008 MacFoern 100%Installer v1.0 ---------- - - - - - - - - - - - - FULL SYSTEM & SINGLE COMPONENT INSTALLER ---------- - - - - - - - - - - - - SUPPORTED MAINBOARD: MSI-7358 v1.1 Fab.D SUPPORTED CHIPSETS: Intel 82801IR/IO/IH (ICH9R/DO/DH) 6-Port AHCI SATA Controller (All internal SATA-Ports 1-4 / 2 eSATA Ports) Marvell 88SE6111 SATA/ATA Controller (1 internal SATA-Port 0 / 2 internal ATA UDMA Ports) SUPPORTED GRAPHICSCARD: nVidia GeForce G80 8800GTS 640MB DDR3 PCIe (EFI Boot String) SUPPORTED ETHERNET: 3COM 3C905C-TX 10/100 Fast Ethernet PCI SUPPORTED PLATFORM: Leopard 10.5.2 JaS (PC_EFI_V8 + Apple Graphics Update v1.0) Update to 10.5.3 via Kalyway 10.5.3 ComboUpdate or JaS 10.5.3 Update. Needs to reinstall ICH9x drivers!!! KERNEL: Kabyl Kernel 9.2.2 (Sleep / Reboot / Shutdown) Apple Vanilla Kernel 9.2.2 (No Sleep / No Reboot) USE AT YOUR OWN RISK! DON'T BLAME ME FOR DAMAGE OR DATA LOOSE INSTALLATION GUIDE: BIOS CONFIGURATION: Plain AHCI/SATA mode for maximum flexibility. Disable OnBoard Intel 82566DC-2 Gigabit Ethernet. (not supported by OsX86) Disable OnBoard Intel HDAudio Realtek ACL888 8Ch.Digital. (not fully supported by OsX86) INSTALL DVD: JaS OsX86 10.5.2 INSTALL OPTIONS: -GUID-Partitiontable -Netkas PC_EFI_V8 -Apple 10.5.2 Graphics Update v1.0 -Reboot using JaS OsX86 Install DVD. -Press F8 and type "rd=diskXsY" at Darwin Bootloader to boot from HDD. (X is Drive-N°. / Y is Partition-N°.) -Complette Installation. -Install MacFoern100%Installer v1.0. (Full System or Single Component Installer) -Delete AppleIntelPowerManagement.kext from "/System/Library/Extensions" Folder. -Repair Extensions and finally reboot without DVD. -Press F8 and type "-v -f" at Darwin Bootloader to force rebuilding MKEXT. -Have Fun with your flawlessly working System USB/FIREWIRE-AUDIO: Use an USB/Firewire-Audio alternative to have fully working Stereo/Multichannel InOut. OnBoard ALC888 is crappy and makes the system a little bit unstable!!!! (AppleHDApatcher + ALC888*.txt) (No Input, only 2Ch. Digital/Analog Output + unstable) => NO 100% SOLUTION !!! TESTED BY ME: -Hercules MUSE Pocket LT USB 5.1 (OOB) SHOULD WORK TOO: -Soundblaster Live! 24-Bit External (SB0490) -Zalman ZM-RSSC External USB 5.1 Sound Card -CN-126 USB to Audio 5.1 Adapter -SWEEX External Sound Card 5.1 with Digital InOut USB2.0 (SC004) -Turtle Beach Audio Advantage Micro 5.1 USB -Digitus 5.1 USB (DA-70770) -Creative Audigy 2 NX 7.1 USB -Focusrite Saffire LE Firewire -Griffin 4019-FIRESS FireWave Sourround Sound for Macs DOWNLOAD LINK: http://rapidshare.com/files/119043525/MacFoern100pro_install_package.zip.html (25MB) ICH9x/Marvell 88SE6111 Kombo Driver might work on other Mainboards too. Try my Single Component Installer and cross fingers SPECIAL THANKS TO: JaS/Leo4All-Team for their great distributions, Netkas for his SMBIOS & PC_EFI, DuNe for his ICHx research, Sander for telling me that Marvell IDE is now supported, BugsBunny for his list of external sounds that work, the whole InsanelyMac Forum for support, Sebbo for being by my side and making coffee and TOOL & HURT for providing me with good music Please feel free to add comments or problemreports. GREETZ MacFoern Link to comment Share on other sites More sharing options...
Recommended Posts