qweasd Posted May 27, 2008 Share Posted May 27, 2008 I have a successfully setup on versions Leo4all v3.0 with the spec: Mobo: XFX 680i SLI CPU: Intel Core 2 Duo E6400 Ram: 2GB Corsair VGA: XFX nForce 250MB XXX 8600 Wireless: Edimax nMax 802.11n PCI Card iAtkos v2.0 installation process: My partition name Leopard. If you guys have differents name then change to match the patch process below. My Mainboard is setup with default. However this is not making a dual boot. I have 2 HDD and setup windows XP on 1 HDD, iAtkos on another HDD. I also set XP HDD is first boot in mainboard and edit little bit on startup files to make it dual boot. Download the patch below and place them into an USB named PATCHER Boot with flag nforce_core MBR format Stick the following on Customize part: iAtkos Main System Darwin Bootloader Kernel 9.2.0 nForce Core EFI AppleSMBIOS netkas NVinject 256MB Nforce SATA After the installation, I got the kernel panic by NVDAResman.kext. Then reboot with flag -x, it will go through to, but the VGA card is working improperly. To get the VGA working properly, have to apply the patch below. This patch is only working with nForce 8xxx series. Process of the patch: Place the iAtkos v2.0 DVD into the DVD driver again and let it boots with flag nforce_core. Instead of going to Utilities Disk, open Terminal and type the followings: cd /Volumes/Leopard/System/Library/Extensions/ rm -rf Geforce.kext NVDANV50Hal.mkext NVDAResman.kext NVinject.kext cd /Volumes/PATCHER/ cp -R Geforce.kext NVDANV50Hal.mkext NVDAResman.kext NVinject.kext /Volumes/Leopard/System/Library/Extensions/ cd /Volumes/Leopard/System/Library/Extensions/ chown root:wheel Geforce.kext NVDANV50Hal.mkext NVDAResman.kext NVinject.kext chmod -R 755 Geforce.kext NVDANV50Hal.mkext NVDAResman.kext NVinject.kext Then exit Terminal and reboot. Take out the DVD from DVD driver. It will spontaneously boot into the OS. Patch link http://www.megaupload.com/?d=FLXC9EQN Here are some pix Link to comment https://www.insanelymac.com/forum/topic/107189-guide-xfx-680i-sli-iatkos-v20/ Share on other sites More sharing options...
iflickr Posted June 28, 2008 Share Posted June 28, 2008 not working for me when i try to go to cd /Volumes/Leopard/System/Library/Extensions/ its give me no such file or directory Link to comment https://www.insanelymac.com/forum/topic/107189-guide-xfx-680i-sli-iatkos-v20/#findComment-799461 Share on other sites More sharing options...
Recommended Posts