HELLP! installing leopard on amd machine..

[jeoffrey]

i really need help guys..

iim installing leopard on a amd desktop..

ive tried kalyway, leo4all and zephyroth but nothings happens..

i did -v and -x on boot but after some lines of text it RESTART...

 

heres the specs:

Foxconn Winfast 6100k8mb

amd sempron 2500+ (supports sse2 sse3)

nvidia 7100gs pcie 256mb...

 

pls someone help.. whats wrong?

is my motherboard not supported..

ive read that you have to enable or disable the No execution thing on the bios.. but i cant find it on my bios....

[hecker]

Maybe your board is not supported.

You can try the following:

- remove any hardware that you don't need during the installation (ie. extra drives, pci cards, printers, etc).

- toggle the ACPI setting in your BIOS

- toggle your power saving options from disabled to enabled (or vice-versa).

- check that your drives are jumped correctly (master/slave) and manually set the parameters in your BIOS (turn off the AUTO-detect option and set master/slave option manually).

 

You should also carefully read the installation instructions provided by the release team/person as many of the FAQs are answered there (Leo4all includes a section on rebooting errors).

 

Read this site's FAQ/tutorial sections. The "rebooting symptom" is very common.

 

Good luck!

 

hecker

[jeoffrey]

hey hecker thanks for the help..

ive configured everything but it stays the same.. the acpi setting on my bios have three option s1, s3, and s1&s2...

i just notice before it reboot i see, just a glimpse because it was fast, the last line says EFI blah blah blah....

maybe thats what causing it? or maybe not... or my board as you say is not supported..