Papa Bear Posted May 14, 2008 Share Posted May 14, 2008 Ok so i boot from the Kalyway disc. Everything seems to run fun until i get into the GUI part of the installation. At this point my keyboard and mouse are not working. They are standard PS/2 devices. Here is my hardware information below. I had a KVM switch connected so i removed it to test that and got the same result. Any input or ideas? Hardware Base processor Athlon 64 X2 (W) 4200+ 2.2 GHz 2000 MT/s (mega transfers/second) Socket AM2 Chipset GeForce 6150 LE Motherboard Manufacturer: Asus Motherboard Name: A8M2N-LA HP/Compaq motherboard name: NodusM3-GL8E Memory Component Attributes Memory Installed 1 GB Maximum allowed 4 GB* (4 x 1 GB) *Actual available memory may be less Speed supported PC2-4200 MB/sec Type 240 pin, DDR2 SDRAM Hard drive 320 GB SATA 7200 rpm 16X DVD(+/-)R/RW RAM (+/-)R DL LightScribe drive Must use Double-Layer media discs in order to take advantage of the DL technology Must use LightScribe-enabled media discs and supporting software in order to take advantage of the LightScribe technology Function Maximum speed DVD-RAM Up to 5X DVD-R DL Write Once Up to 4X DVD+R DL Write Once Up to 8X DVD+R Write Once Up to 16X DVD+RW Rewritable Up to 8X DVD-R Write Once Up to 16X DVD-RW Rewritable Up to 6X DVD ROM Read Up to 16X CD-R Write Once Up to 40X CD-RW Rewritable Up to 32X CD-ROM Read Up to 40X Modem 56K bps data/fax modem Video Graphics Integrated graphics Sound/Audio Integrated High Definition audio Realtek ALC 888 chipset Supports up to 8 audio channels Dolby Pro Logic II compatible Network (LAN) Integrated 10/100 Base-T networking interface Memory card reader USB interface Supports the following cards: Compact Flash I Compact Flash II SmartMedia Memory Stick Memory Stick Pro MultiMediaCard Secure Digital (SD) Micro Drive xD Picture Card (xD = extreme digital) External I/O ports I/O ports on the front panel Port type Quantity 9-in-1 (4 slot) + 1 USB One 1394 One USB Two Headphone One Line-in One Microphone One I/O ports on the back panel Port type Quantity PS/2 (keyboard, mouse) Two VGA One USB Four 1394 One LAN One SPDIF out (coaxial) One Audio (side speaker out, rear speaker out, center speaker out, line-in, line-out, microphone) One Each Expansion slots Slot type Quantity PCI Three (Two available) PCI Express x16 One (One available) Drive bays Bay type Quantity 5.25" Two (One available) 3.5" Three (One available) Keyboard and mouse HP multimedia keyboard Quebec Keyboard Kit (French Canada only) HP PS/2 scroller mouse Software Link to comment Share on other sites More sharing options...
mdoyle Posted May 14, 2008 Share Posted May 14, 2008 I have the same problem. While it's loading with the -v swith I see AppleUSBEHCI UIMInitialize Unable to get memory from device I've tried several USB keyboard and mice combo's, and PS2, same error both ways. Link to comment Share on other sites More sharing options...
Papa Bear Posted May 15, 2008 Author Share Posted May 15, 2008 I have also now tried with Leo4All and have the same problem. I thought maybe mac just doesn't like PS/2 but if you are having the same issue with USB i am not sure. I have the same problem. While it's loading with the -v swith I see AppleUSBEHCI UIMInitialize Unable to get memory from device I've tried several USB keyboard and mice combo's, and PS2, same error both ways. Link to comment Share on other sites More sharing options...
Recommended Posts