Whosat Posted May 11, 2008 Share Posted May 11, 2008 Hello all. This is my first post here. Forgive me if I do wrong. =X I plan to get OSx86 10.5.2 (Kaylaway) on my computer which currently has WinXP SP2. This is its setup: Motherboard: Gigabyte P965-DS3 rev3.3 GFX: ATi Radeon 3850HD Sound: Creative Sound Blaster Audigy 2 (onboard disabled through BIOS) Network: DLink WLAN PCI Adapter DWA-520 (onboard LAN disabled through BIOS) RAM: 2gb Processor: Intel Core2Duo E6400 O/C to 3.28GHz (stock 2.13GHz, overclock ratio ~153%) (SSE3 supported) HDD: 2x Western Digital Caviar SE 120GB on a 64kb-stripe RAID0 array through onboard's SATA RAID controller (JRaid) HDD: Above amounts to 240gb on RAID0 - Partitioned 20gb for WinXP, 80gb for WinXP Applications, 4gb for PAGE, remaining for SWAP (temp). I plan to install MacOSx86 on this SWAP, re-partitioning 60gb for that purpose. HDD: 1x 240GB Samsung Hard Drive (DATA drive, no OS) Will my abovementioned setup work well, with no conflicts whatsoever? How do I get my JRaid drivers put into the MacOSx86 installation iso? Is there any porting application to port windows drivers for the mac? DLink does not supply mac drivers for my DWA-520 Lastly, will MacOSx86 detect both my cores and run on both cores? I would be greatly appreciative if anyone could help me out with this. =) Regards, Whosat Link to comment Share on other sites More sharing options...
Recommended Posts