10.5.2

[Derek Techie]

Boys, good work. Can't believe you guys able to pull this off. I loaded my last night. Everything work great except system profiler crash and can't run any apps with video stuffs such as front row, DVD player and etc. Any suggestions?

 

 

Below is the list of things are working.

Networking

Dual monitors with correct resolution

Mira remote control with apple remote

Reboot

Sleeep<-----------It fell to sleep when i was sleeping and I can wake it up.

[BigPimpin]

Really? The built-in ethernet is working? I find that hard to believe. It would be a major accomplishment and few, if any, first-time posters can lay claim to such a feat. What are the specs of your ethernet adapter/chip?

[Derek Techie]

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::50bc:531d:474d:d705%en0 prefixlen 64 scopeid 0x4 inet 10.10.1.10 netmask 0xffffff00 broadcast 10.10.1.255 ether 00:00:00:00:00:00 media: autoselect (1000baseT <full-duplex,flow-control>) status: active Yes, and it's syncing at 1 GbpsIt is Broadcom NeXtreme 57xx Gigabit Controller...As you notice, the mac addr is all zero..I do need help on those stuff is not working.

[BigPimpin]

There's no solution for that yet. You can assign a MAC address using 'ifconfig en0 ether xx:xx:xx:xx:xx:xx' but it doesn't really fix the problem. I was hoping against hope that you found the silver bullet and somehow actually got the BCM5751 ethernet chip to work.

[Derek Techie]

Even my is all zero....Ethernet works..Last login: Sat Apr 26 22:18:22 on console

derek-xxxxxx-mac-pro:~ dexxxx$ ifconfig

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1

inet 127.0.0.1 netmask 0xff000000

inet6 ::1 prefixlen 128

gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

inet6 fe80::50bc:531d:474d:d705%en0 prefixlen 64 scopeid 0x4

inet 10.10.1.10 netmask 0xffffff00 broadcast 10.10.1.255

ether 00:00:00:00:00:00

media: autoselect (1000baseT <full-duplex,flow-control>) status: active

duplex,hw-loopback> 1000baseT <full-duplex,flow-control>

derek-wongs-mac-pro:~ derekw$ ping 4.2.2.2

PING 4.2.2.2 (4.2.2.2): 56 data bytes

64 bytes from 4.2.2.2: icmp_seq=0 ttl=59 time=9.728 ms

64 bytes from 4.2.2.2: icmp_seq=1 ttl=59 time=10.797 ms

^C

--- 4.2.2.2 ping statistics ---

3 packets transmitted, 2 packets received, 33% packet loss

round-trip min/avg/max/stddev =

 

 

My works..I hope someone can help with system profiler and video stuffs...

 

 

System profiler crash every time I launch it...and video stuff all application depend on specific video function will not launch.....

 

Please help!!! Calling all dudes!.....

[Derek Techie]

I got it everything working including ATI Radeon HD 2600 XT with Hardware Accelerated and system profiler doesn't crash. Of course except broadcom 57xx mac address issue which to me no biggy.

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9589

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

KDL-V32XBR2:

Resolution: 1360 x 768

Depth: 32-bit Color

Core Image: Hardware Accelerated

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

DELL E173FP:

Resolution: 1280 x 1024 @ 60 HzATI Radeon HD 2600 XT

 

 

ATI driver found at:

http://rs276.rapidshare.com/files/100461387/ATI-2600PRO.zip

 

And applied patch to fix System Profiler using Profile-Fix file but I can't find where did I download it..I pretty sure you can find it.