themiller12 Posted September 25, 2015 Share Posted September 25, 2015 Hi guys ! (1st part : Tutorial, 2nd part : Question) 1st part : After 2 days i managed to make my hackintosh works. Here is my config : - i7 4790K - MSI Gaming 5 - 16 gb ddr3 - Saphire R9 290 Tri X - SSD Crucial 240 Go. Installation steps : After i used clover for post installation, I installed these kext with kext wizard : - AtherosE2200Ethernet - This script for audio : https://github.com/toleda/audio_CloverALC/blob/master/audio_cloverALC-100.command.zip(answer y to all) - These ones for my R9 : http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=165585 I edited my config,plist with following options : Boot : Kext-dev-mode = 1, dart = 0 Devices : ATI : 0x67B01002, IntelGFX : 0x04128086, USB (√ Inject, √ Add ClockID, √ FixOwnership), Audio : 1, √ ResetHDAGraphics : FB Name : Baladi, VRAM : 4096, Video ports : 4, √ Load Vbios, √ Inject Intel, √ Inject ATI. Kernel and Kext Pacthes : ATI connectors Data : 000400000403000000010300120403030004000004030000000101001102010100040000040300000001020021030202000400000403000000010400220504040004000004030000000105001000050500040000040300000001060020010606 ATI Connectors Patch : 000800000402000000010200220502030004000004030000000101011204010100040000040300000001020021030202040000001402000000010300110203040004000004030000000105001000050500020000040200000001040110000406 √ Apple RTC - √ KernelHaswellEAti Connectors Controller : 8000SMBIOS : MacPro6,1 With this config, my 2 screens works in HDMI and DVI, i hope it will be helpfull for other people. 2nd part : But i would like to know if i should install other kext ? For SSD, USB 3 for exemple ? Thanks by advance ! Link to comment Share on other sites More sharing options...
anonymousnbs Posted September 26, 2015 Share Posted September 26, 2015 USB 3.0 Link to comment Share on other sites More sharing options...
themiller12 Posted September 29, 2015 Author Share Posted September 29, 2015 Okay Thanks ! I installed it even if i didn't see anything new. Actually, on login screen my keyboard is in QWERTY. Can i change it by setting "fr" in Clover config ? Link to comment Share on other sites More sharing options...
Recommended Posts