wmanu Posted April 18, 2015 Share Posted April 18, 2015 Hi Experts, I'm running OS X 10.10.1 on following hardware: Q6600 @ 2.4Ghz 4GB DDR2 800 GA-P35-S3G GeForce GTX 650 Mackintosh got installed without any issues, all devises seems to be detected and working as expected (audio, graphics, usb etc). But get stuck during normal restart, screenshot attached. However, entering single user mode (-s) and then firing fsck -fy command and reboot will boot back into the system. Sounds strange, but I've tried several times and this method (single user > fsck > reboot) works always. I'm having following parameters in org.chameleon.Boot.plist, and also added nVidia web drivers along with ALC662, AppleHDA, HDAEnabler kexts to get the audio working properly. <key>EnableHDMIAudio</key> <string>Yes</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>1680x1050x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>HDAEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>-v kext-dev-mode=1 dart=0 nvda_drv=1 debug=0 PCIRootUID=1</string> <key>PciRoot</key> <string>1</string> <key>SkipAtiGfx</key> <string>Yes</string> <key>SkipIntelGfx</key> <string>Yes</string> <key>Theme</key> <string>Choose_Your_OS</string> <key>Timeout</key> <string>1</string> <key>UseKernelCache</key> <string>Yes</string> Could anyone guide me to a solution to boot directly, please? Many thanks. Link to comment Share on other sites More sharing options...
luki1979 Posted April 18, 2015 Share Posted April 18, 2015 Did you try GraphicsEnabler=No and no nvda_drv=0 ? Link to comment Share on other sites More sharing options...
wmanu Posted April 18, 2015 Author Share Posted April 18, 2015 Did you try GraphicsEnabler=No and no nvda_drv=0 ? Yes tried different combinations of above, but still the same issue. One thing I've noticed is, system comes back if I go for restart, whenever a shutdown happens, the next boot will get stuck. Thats the reason single user mode and then reboot works. Also, system won't wakeup if it goes to sleep mode. Link to comment Share on other sites More sharing options...
wmanu Posted April 19, 2015 Author Share Posted April 19, 2015 Ok, some improvements made. Tested with GA-P35-DS3R DSDT and boot stuck and sleep issues have been disappeared. But with this DSDT, network doesn't work, the adapter cannot connect with DHCP. (I'm using an add-on card, built-in has some issues.) I've tested with GA-P35-DS3R DSDT because I cannot find one for GA-P35-S3G. Attached dimpled DSDT, is there a way I can push to use the older network driver? Also, the front mic jack is not working, stereo works. dsdt.dsl.zip Link to comment Share on other sites More sharing options...
Recommended Posts