Ckane Posted May 20, 2013 Share Posted May 20, 2013 Ok this is what I have for a build Asus P8z77 M-Pro (Had Bios v.1616 had to go to 1708 64bit so it can recognize the 16gigs of ram ) Asus Geforce GTX 660 TI 2GB Corsair 16 gig 1600mhz DDR Ram Intel i7 3770K ivy bridge Corsair CX 600 Cooler Master Seidon 120M Sandisk Extreme 120GB SSD (Win7 Ultimate 64bit installed) Seagate Barracuda 500GB SATA 6gb (OsX Mountain Lion installed) Cooler Master 690 II advanced TP-Link WDN4800 My problem is that on the windows drive these aren't working.....in Device manager it shows yellow with ! Ethernet Controller Network Controller PCI Simple Communications Controller SM Bus Controller Universal Serial Bus USB Controller Universal Serial Bus USB Controller Do I just find the drivers online or with this being a hackintosh machine is it different ??? I don't want to get this screwed up I've worked way to hard so far to get this far. Any help is greatly appreciated Thanks Link to comment Share on other sites More sharing options...
BALDY_MAN Posted May 20, 2013 Share Posted May 20, 2013 shut down pc unplug your mac. then boot windows. device manager right click windows drive update driver or best get driver from sandisk site load to usb . then device manager let me pick driver then have disk then choose usb were you have driver. load driver reboot. then plug in mac drive Link to comment Share on other sites More sharing options...
Ckane Posted May 20, 2013 Author Share Posted May 20, 2013 the OSX ML drive is fine because of all the stuff I have use everything works great I just thought for the windows partition all I am doing it installing drivers like you normally would from the manufactures site like example...... TP-Link WDN4800 just go to the site download the driver needed Ethernet Controller would be the asus site and so on and so on Link to comment Share on other sites More sharing options...
Ckane Posted May 21, 2013 Author Share Posted May 21, 2013 Nm got all my stuff working now on the windows part next is when I boot up I am in a "MS-DOS" type screen the only way to explain it lol.I want it to look like this... http://www.di-rs.com/forums/lofiversion/index.php/t97229.html Link to comment Share on other sites More sharing options...
BALDY_MAN Posted May 22, 2013 Share Posted May 22, 2013 make your mac drive the first boot drive in bios settings then bootloader will see your windows drive as well. and you can choose which os to boot into Link to comment Share on other sites More sharing options...
Recommended Posts