No replies to this topic

[Warped]

Hi,
Maybe somebody can hint me where issue is:

I have GA-P35-DS4 with OC Q6600 (3,6G@1,375V). BIOS is F14, bootloader is Clover r1050, OS is ML 10.8.2.
Basically OC HW/OS seems to be 100% functional - also SpeedSteep seems to be working - but only for freq. Vcore is costant (1,375V)

What I want to achieve is FULL SpeedSteep (Freq & Vcore) on OC HW (Q6600@3,6G, FSB=400, Vcore=1.375).

Currently I'm able to get FULL SpeedSteep if HW is NOT OC (Q6600@2,4G, FSB=266, Vcore="Normal").

I already added _PSS & LPC sections to DSDT.
My _PSS have declared 4 P-states for 1600, 2000, 2800, 3600 frequencies. I disabled P-state/C-state generation in Clover.  
With those modifications launching IORegExpl shows LPC in device tree, AICPMVers is present, I see my 4 P-states in PerformaneStateArray, but I'm geting CPUPLimit=0x03.

Basing on other forum threads - CPUPLimit=0x03 means native PM isn't working.

With above config:
1. I see that load causes CPU freq changing. HWmonitor reports 2,4-3,6G - but never to 1,6G. 2,4G isn't defined in my _PSS - so something wrong is here....
2. Vcore is constant despite Vid entries in _PSS.
3. P-States/C-States in SMC monitor are reported correctly (1600, 2000, 2800, 3600) - but for some reason system behaves like ignoring my _PSS entries in DSDT and is using it's own (lower freaq is always 2,4G and Vcore is always constant).

What I investigate:
-I can get dynamic Vcore ONLY if BIOS has Vcore option set to "Normal". Any change Vcore option from "normal" causes SpeedSteep Vcore becomes constant.
-above PM SpeedSteep issue is the same in Chameleon r2016 & clover r1050.
-all this pretends like my system is using ACPI/BIOS PM, while OSX PM runs in parallel but without any effect on HW.

May somebody hint me where issue might be?

Thx in advance