291 replies to this topic

[jeffc2009]

ugokind, on 18 December 2012 - 04:41 PM, said:

early I got applehda from other forum.. but your 1st post is as good as mine. So I decided to move to your package.
I suppose g53 and g73 are quite similar.. and the audio (for me) is the same.

no I managed codec verbs )as theking docet) in my old laptops.. I decided to never work on them.. because I have no time for .
But.. AppleHDA is your. Also HDAEnabler

I also have my dsdt i ( build it by mys..)

inside the injection is:

Device (HDEF)
		 {
			 Name (_ADR, 0x001B0000)
			 OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)
			 Field (HDAR, WordAcc, NoLock, Preserve)
			 {
				 DCKA, 1,
						 Offset (0x01),
				 DCKM, 1,
					 , 6,
				 DCKS, 1,
						 Offset (0x08),
					 , 15,
				 PMES, 1
			 }
			 Method (_PRW, 0, NotSerialized)
			 {
				 Return (GPRW (0x0D, 0x04))
			 }
			 Method (_DSM, 4, NotSerialized)
			 {
				 Store (Package (0x04)
					 {
						 "layout-id",
						 Buffer (0x04)
						 {
							 0x0C, 0x00, 0x00, 0x00
						 },
						 "PinConfigurations",
						 Buffer (Zero) {}
					 }, Local0)
				 MCDP (Arg2, RefOf (Local0))
				 Return (Local0)
			 }
		 }

remember: the PRW method tell how to resume power from wake

but I tested a hundred of times.. and ONLY WITH IOAUDIOFAMILY modded the wake run
and ONLY if I have mbp8,2 !

I tested it since april 2012.. this is the 1st time (and definitely) I have sleep and wake

If I change only 1 of those settings.. the sleep never run.

EDIT:

I tested the latest macbook update
results: black VIDEO screen

ps: what kind of KERNEL is the one in top of that page?

should I use it? does it have improvements?

You don't need to stay with 8, 2 to have sleep/wake.  I think you are staying with 8, 2 to have graphics powermanagement right?  my new setup is on 9, 1.  Once I have it tested out, I am going to change OP.

I know sleep/wake was a issue before ML ( i think it had started with Lion/that's why I had left it ), but now it's fixed with the latest apple/nvidia kext's.  You have so many patches on your dsdt, have no idea where to start!  Do you still have a fresh copy of your windows extracted dsdt?  Kernel is from MacBook Air and MacBook Pro Update 2.0.

Attached Files

•  kernel 12.2.1.tiff   110.56K   2 downloads

[ugokind]

I hate redundant attachments..
so I managed from lion to ml in my 2 main thread since 1 year

but.. is useful to read my dsdt?

heare you are

consider that I have the same dsdt mods from april 2012.. but in july I started from scratch for a biosmod project.

the hdef section is only cosmetic. and the PRW is not my mod. is native in the stock bios!

Attached Files

•  Archivio.zip   88.7K   7 downloads

[jeffc2009]

ellnic, on 18 December 2012 - 04:47 PM, said:

I too am getting a black screen before hitting the desktop. I had to install that Macbook graphics updating while booting into my main install. I assumed it would fix it, but it didn't.

This is a fresh install doing the following:

Install Olarila 10.8.2
Boot using Olarila USB
Put Extra folder in
Install Enoch and Modules
Install S/L/E from package
Reboot...

Going to try again incase I have messed something up.

EDIT: No installation of Nvidia Kexts, right?

What i did was,

1-install Olarila 10.8.2
2-boot with -x
3-do you have two partition with ML?  If so, there's no need to install Enoch boot loader.  And the simplest way to recover from a bad hack!  If you set hibernation mode 0 and delete sleep image, it only requires 10 gigs.  If not, install Enoch no modules(standard boot loader).
4-apply S/L/E with kext wizard
5-install extra folder in root
6-remove bootcache.kext/update kernel cache reboot
7-install 10.8.2 supplemental update 1.0 from App store
8-reboot
9-install MacBook Air and Macbook Pro Update 2.0
10-reboot
11-reapply package with kext wizard/remove bootcache.kext/update kernel cache reboot

****do not install Nvida official drivers/do not change or add anything in S/L/E****

[ugokind]

in september I spent 3 weeks in google talk with a great young boy (named rajgopalsunny
it is a student in India.. and he's no time for register and use insanelymac (ahi ahi)
and I helped him to achieve the best with it's g74
so he told me he's good to do biosmod.. and he gave me a mod for the g53

it's kext/bios are in:
http://www.osx86.net...lehda.kext.html
http://www.osx86.net...do=file&id=3221

[jeffc2009]

ugokind, on 18 December 2012 - 05:07 PM, said:

in september I spent 3 weeks in google talk with a great young boy (named rajgopalsunny
it is a student in India.. and he's no time for register and use insanelymac (ahi ahi)
and I helped him to achieve the best with it's g74
so he told me he's good to do biosmod.. and he gave me a mod for the g53

it's kext/bios are in:
http://www.osx86.net...lehda.kext.html
http://www.osx86.net...do=file&id=3221

these patched .dsl?  Do you have pre patched .dsl?  Why did you mod your bio?  I know about the bio's hack for native AICPUPM, how is it working out for you?  What i was trying to do is get g53 without any modded bio's setup/merge with what i have.   Use your non modded bio dsdt to apply my patch.  I know you have a link to my install on your G53 thread for guys that don't want to flash modded bio's.  Just trying to help

[ugokind]

nein. i never use prepatched.. or tools.. I do myself

what you refer to 'these' is a work made by the indian.. I linked it for you. But it's not important for me.

I'm unable to mod bios. I tried a lot of time.. but without success.
It's hard or I have not the right toolchain.
I can achieve the explode of the bios.. but I cannot recreate the one crypted file.

The indian made it for me.. exchanging for my consulence.

the bios is also grabbable from another forum. I'll search for.. but actually I don't have links
this is due a lot of people wants the slic mods.. but someone did the throttle fix and the greatMSR fix

Now I have the unlocked BIOS.. and the MSR is a flag to enable or not.
with the flag disabled.. I can boot with the vanilla AICPM without an sort of KP

but within the new bios.. all the ASUS tools in the Windows7 environment don't detect an asus platform.. and my keyboard/special key are not enabled!

YES I AGREE: my goal is to restore the stock bios and test your kexts.

but stop messing with bios/audio/sleep

a bios mod is not a magic wand.. is only an unlocked bios! your kext are good APART from a bios mod or not!

I tried a hundred of combinations.. from smbios.plist to manual separate nvda kext.. for 11 months!
untul I found the right combinations.

bios mod or not.. the problem is
-what are the minimum kext to replace?
-what is the only one smbios emulation to run sleep for your g74?
-what is the right bootloader that is able to NOT patch anything but only what you want?

in this last point.. remember that i use 2064.. but in the Extra/modukles I delete all EXCEPT for Klibc/SATA/uClib
other kext do problems/kp/NOT SLEEP

bye

[ellnic]

jeffc2009, on 18 December 2012 - 05:05 PM, said:

What i did was,

1-install Olarila 10.8.2
2-boot with -x
3-do you have two partition with ML?  If so, there's no need to install Enoch boot loader.  And the simplest way to recover from a bad hack!  If you set hibernation mode 0 and delete sleep image, it only requires 10 gigs.  If not, install Enoch no modules(standard boot loader).
4-apply S/L/E with kext wizard
5-install extra folder in root
6-remove bootcache.kext/update kernel cache reboot
7-install 10.8.2 supplemental update 2.0
8-install MacBook Air and Macbook Pro Update 2.0
9-reapply package with kext wizard.

****do not install Nvida official drivers/do not change or add anything in S/L/E****

Thanks for the step by step, it's very helpful. I am meant to be using only the "10.8.2 Kernel 12.2.1 9, 1.zip" right? It's just I cannot, for love nor money, get those 2 updates to install. A while back, the Macbook and Macbook Air one went through but failed, now they both say that they are not for this computer. :S

[jeffc2009]

Do you have G53SW or G53SX?  Diffmerge.tiff   1.58MB   2 downloads  Your package for G53SW contains G53SX look ->  Diffmerge1.tiff   473.84K   0 downloads

ellnic, on 18 December 2012 - 06:08 PM, said:

Thanks for the step by step, it's very helpful. I am meant to be using only the "10.8.2 Kernel 12.2.1 9, 1.zip" right? It's just I cannot, for love nor money, get those 2 updates to install. A while back, the Macbook and Macbook Air one went through but failed, now they both say that they are not for this computer. :S

Let me redo my install and I will get back with you on methods.

[ellnic]

Thanks - sorry to be a pain in the arse!

This is what I get: http://i47.tinypic.com/28vqe87.png

EDIT: This is what I see in Software Update at the moment: http://i47.tinypic.com/29qb2vs.png

[jeffc2009]

I have updated post 183.  I thought i saw 10.8.2 supplemental update 2.0 from App store.  But it's 10.8.2 supplemental update 1.0.

is insanelymac getting laggy on you guys?

[ellnic]

jeffc2009, on 18 December 2012 - 07:46 PM, said:

I have updated post 183.  I thought i saw 10.8.2 supplemental update 2.0 from App store.  But it's 10.8.2 supplemental update 1.0.

Ok, Thanks - will try it out

jeffc2009, on 18 December 2012 - 07:46 PM, said:

is insanelymac getting laggy on you guys?

Yeah, I had an SQL error a while ago, and page reloads are taking an age.

[ellnic]

Ok Got it, Jeff matey, you're a genius.

With your files in "10.8.2 Kernel 12.2.1 9, 1.zip" I have 99% working system - the only thing for some reason that still does not work for me is backlit keys - but all else works and it's very straight forward to do.

I did this:

1. Install Olarila 10.8.2
2. Use Olarila to boot installed partition (didn't need to boot with -x, guess this could be added as a step if some are experiencing problems)
3. Install Enoch
4. Add kexts to S/L/E with Kext Wizard
5. Put Extra in Root
6. Delete contents of S/L/Caches
7. Reboot
8. Install OSXUpd10.8.2Supp.dmg
9. Reboot
10. Install MacBookAirandMacBookProUpd2.0.dmg (it fails at the end but ignore it)
11. Reboot
12. Re-Apply S/L/E kexts using Kext Wizzard (I noticed that none were changed, but just to be safe)
13. *Repair permissions (sudo diskutil repairpermissions /)
14. Reboot
15. Shut down
16. Plug in HDMI cable (DO NOT DO THIS FOR THE FIRST TIME WHILE OS IS RUNNING = BLUE SCREEN/HANG)
17. Boot up
18. Remove HDMI cable (Cable can now be connected while OS is running - select HDMI audio in Pref Pane)

*This step is really important, there were lots of permissions that needed repairing after the supplemental update.

DONE

Optional in terminal:
1. sudo pmset hibernatemode 0
2. sudo rm /private/var/vm/sleepimage

What works:

Audio, HDMI Audio, HDMI Hot Swap, Display Res Change, USB 3, Battery Icon, Sleep, Wake, Wifi, Audio After Sleep (including headphones and HDMI which were problematic in the past), USB after sleep has no problems

What doesn't:

SD Reader (we know)
Backlit keys (maybe I need to use my own DSDT?)

EDIT: I know step 10 must have installed correctly, because sleep works... I guess it's similar to the old Snow Leo install error that Hackintoshes used to get at the end.
EDIT 2: Added reboot after MacBookAirandMacBookProUpd2.0.dmg install.

[jeffc2009]

Glad you got it working.  I didn't plug hdmi until everything was done.  Do you have your original dsdt for your system?  I don't understand why your backlit keyboard is not working!

Make sure you reboot next time to allow update package to do it's work, before you update kext's and repair permission.  It will not kill your system!!  Use it for couple days and let me know if you run into any problems.  So far, there's one freeze after sleep.  Looked in console and nothing.  You can Use iStat to monitor your system.

[youngwake]

jeffc2009, on 18 December 2012 - 03:14 PM, said:

My did the same thing on a fresh install. When i updated from apple update on existing, i did not get that error.



Go to your S/L/Cache folder and delete everything then reboot.  If still nothing, use kext wizard to reapply all kext in package again.  What model is yours?

I have ASUS G73SW-XT1. I deleted everything in S/L/Cache and deleted BootCache.kext and I am using your DSDT.

jeffc2009, on 18 December 2012 - 03:41 PM, said:

Dec 10.zip contains the modded for nod 14 IOAudioFamily.kext.  Have you tried it ugokind?  what nod is your speakers? mic jack? HP?  But if i remember right, he's complaining about no audio after reboot not sleep!

"
However, the problem is after a reboot, audio is no longer working. "No Output Devices Found" in settings"

ellnic, what do you think about the new install?

youngwake, are you using my dsdt?  look at this pic and let me know what layout id (Audio ID: 1) shows in your?

Yea Im using the new DSDT that is not in the DEC.10.zip

jeffc2009, on 18 December 2012 - 03:55 PM, said:

what did you update before you reboot?



Where did you get your AppleHDA from?  Your layout id is 269, but in your dsdt is showing layout id 12?  Are you using HDAEnabler?  Is youngwake have same g53?  Did you ever get linux codex verbs?  If so, upload it here.  Maybe we can get on the same page with install.  Just noticed you had patch the heck out of your DSDT.  Did you do it yourself, or someone else?

No updates, followed guide to "T" Never had the issue before. However If I install the Audio kext on Thread 1, I get audio again! But the audio kext in DEC10 works perfect when i install the first time along with hdmi audio. After that , i reboot and it is greyed out!

Disregard, going to do fresh install and report back

Attached Files

•  Jeff capture.png   104.43K   22 downloads

[jeffc2009]

You have Audio ID of 269.  Do you have HDAEnabler.kext in S/L/E?  If not, you are not using my dsdt!  I have set Audio ID(Layout ID) of 1 in my dsdt.  Look you have 2 Intel High Definition Audio in that pic, I bet you have a HDAEnabler.kext.

[youngwake]

lol no I dont have HDAEnabler kext. I used everything from thread 1. But no worries. I reinstalled with you and Ellnic's new guide and everything is working beautifully. I will give feed back once i restore my apps with Migration assistant. After that I will reboot and see if audio is still working

[youngwake]

ok, before I rebooted and migrated my applications, my Audio ID: was exactly like yours. But after I restored JUST the applications, the audio is now grayed and Audio ID is now set back to 269. Any Ideas besides not to restore apps?

[jeffc2009]

youngwake, on 19 December 2012 - 04:11 AM, said:

ok, before I rebooted and migrated my applications, my Audio ID: was exactly like yours. But after I restored JUST the applications, the audio is now grayed and Audio ID is now set back to 269. Any Ideas besides not to restore apps?

What did you restore???  HDAEnabler?  DSDT?

Check both

Intel High Definition Audio see what both Audio ID is.

[youngwake]

Just basic apps. nothing more. no settings, no files...ect! I will install again without the restore. The install was flawless however though. Everything worked minus SD CARD

[jeffc2009]

You don't have to reinstall..  Just look in S/L/E for HDAEnabler.kext and replace dsdt.aml in E/E.  I know no apps to replace layout ID.  Bootcache.kext, delete everything in your S/L/Cache folder.  Heading out, be back in couple hrs.  Let me know what you found!  You will have to find a Ethernet kext, I didn't include one in there.