34 replies to this topic

[X-TRiAL]

Thanks, I tried this, but it didn't work for me.

In -v all I got was this "nspace-handler-set-snapshot-time: 1343775763" which is the last thing to load on a normal boot, but it just freezes when I enable the switchable graphics in the BIOS.

[HUSABER]

dont try only -v,try another command -s,-f or press only enter..
you have GraphicsEnabler=Yes in smbios.plist?

[X-TRiAL]

When I use GraphicsEnabler=Yes in Chameleon it loads my DSDT and then shows my card "Nvidia GeForce GT 540M" and the PCI Root ID and then freezes.
I can boot with -x but I could do that before your files were installed.

Will try with -f, -s and enter.

[HUSABER]

upload your boot.plist,and smbios.plist here

[X-TRiAL]

All didn't work for me :/

I have uploaded my DSDT too...  Archive.zip   19.73K   3 downloads

[X-TRiAL]

What you saying?

[HUSABER]

Put inside Extra (No zip...unziped 3 file)
Your DSDT have 1 Error but is fixed totaly

Attached Files

•  Fixed.zip   20.5K   3 downloads
•  Error.png   473.82K   60 downloads
•  Fixed.png   455.92K   52 downloads
•  DSDT.Fixed.aml.zip   18.43K   2 downloads

[X-TRiAL]

Sorry, none of this worked for me.

I used your new files and now I can't boot.

GraphicsEnabler=Yes, freezes and doesn't load any kexts, so I don't think this will be a solution.
When using GraphicsEnabler=No, I just get Kernel Panic with your files.
I have also tried -f -s and enter, and I cannot start up.

Regards

[HUSABER]

Change bootloader....on 3 mashines with  Puma 10.8 i have only one,working perfectly with GraphicsEnabler
Old Chameleon , but boot for 5 sec T61,mobo G41 and G55

[X-TRiAL]

I'm starting to think its not actually the AGPM, thinking it may be more related with this thread:

http://www.insanelym...howtopic=281178

What you think? Worth a try? Maybe you get help with the edit of the Nvidia kext?

Regards

[HUSABER]

SORY ERROR IS MY...
http://www.osx86.net...rch.html#result

[X-TRiAL]

That is for a search?

[HUSABER]

The best driver from site...see post here work.....

[nyolc8]

Sorry for bumping this old topic, but is there any way to patch AppleGraphicsPowerManagement to load with macpro3,1 smbios? Maybe some binary file modification in the kext? I know that it's not loading on real macpro3,1. I just asking that maybe it could be patched somehow...

[aphioner]

Hey guys. After looking for a definitive solution, I finally found one.

It's necessary to modify Applegraphicspowermanagement.kext and SMBIOS (MacPro3,1 or MacPro4,1) and try a new bootloader. I literally didn't change any files except the bootloader and when system booted up AGPM was loaded successfully.