ostry Posted May 16, 2012 Share Posted May 16, 2012 Bonjour, J ai installé un hackintosh SL de HAZARD, sur une GA-K8M800N, avec un sempron 3000 Le reseau a fonctionné desuite, j ai reussi à avoir le son aprés plusieurs soirée de lecture de forums. Mais pour ma carte graphique ATI je peche grave. J ai recupere l' ATIRadeon9700.kext qui normalement doit faire fonctionner ma carte lscpci me donne c est info 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48] L' ID vendor est le 4e48. jusque la ca va mais je n est pas compris quelle valeur je doit rechercher et remplacer avec l'Hexeditor J ai essayé de m aider de ce forum mais...... http://www.projectos...php?showtopic=9 Merci de votre aide ou de vos conseil. Link to comment Share on other sites More sharing options...
ostry Posted May 18, 2012 Author Share Posted May 18, 2012 Dans la liste ci dessous ma carte est bien prise en charge par le *.kext ATIRadeon9700.kext from 10.4.7 :QUOTE 0x3E50 1002 = RV380 [Radeon X600] 0x3E54 1002 = RV380 [FireGL V3200] 0x4144 1002 = R300 [Radeon 9500 Series] 0x4148 1002 = R350 [Radeon 9800 SE] 0x4150 1002 = RV350 [Radeon 9600] 0x4152 1002 = RV360 [Radeon 9600 XT] 0x4A48 1002 = R420 [Radeon X800 Series] 0x4A49 1002 = R420 [Radeon X800 GT] 0x4A4A 1002 = R420 [Radeon X800 Series] 0x4A4B 1002 = R420 [Radeon X800 XT] 0x4A4C 1002 = R420 [Radeon X800 Series] 0x4A4D 1002 = R420 [FireGL X3-256] 0x4A4E 1002 = M18 [Mobility Radeon 9800] 0x4E44 1002 = R300 [Radeon 9700/9500 Series] 0x4E48 1002 = R350 [Radeon 9800 Pro] 0x4E50 1002 = M10 [Mobility Radeon 9600 Pro] 0x4E54 1002 = M10 [Mobility FireGL T2/T2e] 0x4E56 1002 = M12 [Mobility Radeon 9550 0x5B60 1002 = RV370 [Radeon X300/X550/X1050 Series] 0x5B62 1002 = RV380 [Radeon X600 Series] 0x5B64 1002 = RV370 [FireGL V3100] Et c est ici, ou je ne compremd pas d ou viennent c est valeurs, et pars quoi je doit les remplacer malgres les exemples fournie Si quelqu un a une piste je suis preneur. I want to say something about acceleration. The driver ATIRadeonXXXX.kext has internal check for DeviceID so it needs for binary patch.For R300 family in Tiger it was performed by koverg.patch. There are many successful reports with it. I investigated R200-R400 and found more information. For R200 we must to patch ATIRadeon8500 CODE DeviceID Sample 4242..4243 514c 5148..514d 514c 4c64..4c67 4c66 5964 5963 5c61 5c63 For example, if you have DeviceID=514e then your sample=514c Open ATIRadeon8500.kext/Contents/MacOS/ATIRadeon8500 with HexEdit (freeware) Search 3d4c51 replace to 3d4e51 (you see bytes 4e and 51 in reverse order). For R300 CODE DeviceID Sample 3150..3154 3e50 3e50..3e54 3e50 4145..414b 4144 4151 4150 4153..4156 4152 4e45..4e47 4e44 4e49..4e4a 4e48 4e50..4e53 4e50 5460..5464 5b60 5b60..5b65 5b60 5a41, 5a61 5b60 5a42, 5a62 5b60 The same but with ATIRadeon9700. The last sample 5b60 is the same patch as koverg did. For R400 you have two samples 4a48 and 4a4e CODE DeviceID 4a4f..4a54 4b4a..4b4f 5548..5554 564a..5653 5954..5955 5974..5975 5d48..5d57 5e48..5e4f For example you have DeviceID=5e49 Open ATIRadeon9700.kext/Contents/MacOS/ATIRadeon9700 with HexEdit Search 3d484a replace to 3d495e Search 3d4e4a replace to 3d495e Yes, replace both sample! In two or three places! Link to comment Share on other sites More sharing options...
Matt35 Posted July 5, 2012 Share Posted July 5, 2012 Peux-tu poster ta kext sur le forum, ou afficher le contenu du fichier ATIRadeon9700.kext/Contents/MacOS/Atiradeon9700, STP ? Dans certaines extensions, il faut modifier un code pour prendre en charge le modèle souhaité... Link to comment Share on other sites More sharing options...
Recommended Posts