motorhead6776 Posted December 17, 2011 Share Posted December 17, 2011 so im attempting to install lion on my asrock extreme 3 gen 3 motherboard using this guide. http://erikras.com/2...o-striped-raid/ i get as far as booting chameleon but both drives that are in raid give an error mach_kernal not found. im guessing this is because chameleon is installed on the raid helper partition(disk0s3) and the mach_kernal is on the raid group partition (disk3s1). so my question is this, how do i modify the com.apple.Boot.plist to point to the the mach_kernal? also my disks seem to move around when i reboot which is weird. sometimes they look like disk0 - 500gb raid member 1 (6gb/s port0 on the mb) disk1 - 500gb raid member 2 (6gb/s port1 on the mb) there are only 2 6gb ports disk2 - 250gb storage disk (3gb/s port0 on the mb) disk3 - 1tb raid disk ( virtual w/e idk how to explain it ) but other times it looks like disk0 - 500gb raid member 1 (6gb/s port0 on the mb) disk1 - 250gb storage disk (3gb/s port0 on the mb) disk2 - 500gb raid member 2 (6gb/s port1 on the mb) disk3 - 1tb raid disk ( virtual w/e idk how to explain it ) and sometimes disk0 - 250gb storage disk (3gb/s port0 on the mb) disk1 - 500gb raid member 1 (6gb/s port0 on the mb) disk2 - 500gb raid member 2 (6gb/s port1 on the mb) disk3 - 1tb raid disk ( virtual drive? i dont know how to explain it ) but ive never actually changed where anything was plugged into. any input on either issue would be greatly appreciated! Link to comment Share on other sites More sharing options...
Recommended Posts