2 replies to this topic

[ctene]

Hi guys,

Here is the scenario: After a lot of fiddling around and figuring the proper sequence of installing things I finally got a (almost) PERFECT install on my HP Compac DC7600 CMT (4GB DDR2, Pentium D 950 3.4GHz, ATI Radeon HD4650) ... everything absolutely EVERYthing works and all updates are installed - OS is Mac OS X Server 10.6.8 - except for audio - neither the oboard sound (ALC260) nor the built in 7.1 Multi Channel Sound through HDMI does work - however VodooHDA does recognise a HDMI Audio Digital Out and loads a driver unfortunately the device it recognizes has the wrong Device ID ... in Windows my HDMI Audio is recognised as VEN_1002&DEV_AA01 ... under OS X it is recognized under VEN_1002&DEV_AA38. I did look around the other threads if I could find something even remotely similar before posting my question here - there are similar posts but on different hardware so not sure if the instructions would really work. I would be grateful for any hints / suggestions which would lead to my HDMI Audio working (obout the onboard ALC260 I dun care) because then I could ditch damn windows for good. Thx in advance guys.

Attached Files

•  Screen_shot_2011_08_06_at_2.41.25_PM.png   521.46K   48 downloads

[scouser113]

ctene, on Aug 6 2011, 10:01 AM, said:

Hi guys,

Here is the scenario: After a lot of fiddling around and figuring the proper sequence of installing things I finally got a (almost) PERFECT install on my HP Compac DC7600 CMT (4GB DDR2, Pentium D 950 3.4GHz, ATI Radeon HD4650) ... everything absolutely EVERYthing works and all updates are installed - OS is Mac OS X Server 10.6.8 - except for audio - neither the oboard sound (ALC260) nor the built in 7.1 Multi Channel Sound through HDMI does work - however VodooHDA does recognise a HDMI Audio Digital Out and loads a driver unfortunately the device it recognizes has the wrong Device ID ... in Windows my HDMI Audio is recognised as VEN_1002&DEV_AA01 ... under OS X it is recognized under VEN_1002&DEV_AA38. I did look around the other threads if I could find something even remotely similar before posting my question here - there are similar posts but on different hardware so not sure if the instructions would really work. I would be grateful for any hints / suggestions which would lead to my HDMI Audio working (obout the onboard ALC260 I dun care) because then I could ditch damn windows for good. Thx in advance guys.

Hi I have the same graphics card as yourself and am struggling to get mine to be recognised properly. Could you possibly explain how you got yours working? Special kexts files? Etc.

Thanks

[BugsB]

I have the ATI Saphire HD 5450 w. HDMI Audio same as above, in Windows VID 1002 | DID AA01 | SubSys 00AA0100. Did any of you get yours going (via AppleHDA/ VoodooHDA/ DSDT patch)?