53 replies to this topic

[mojtabazarei]

After too many test i have 5730 work on N61jq Ati 5730 m

1.install 10.6.6

2.Before reboot install Lion's ATI5000, ATISupport and ATIFramebuffer One kext is additional

3.Dump your Card bios & Rename the dumped bios 1002_68C0.rom and put it in your Extra folder

(Work without bios )

4.install Chameleon 2.0 RC5 - ATI Experimental in multibeast 3.3 (kabyl code added)

5. Do this for your LCD (Thanks man for the guide ) (most important )

6.Use this command in com.apple.boot.plist in Extra folder

<key>GraphicsEnabler</key>
			  <string>Yes</string>
		  <key>AtiConfig</key>
			  <string>Hoolock</string>
		  <key>UseAtiROM</key>
			  <string>Yes</string>

Now you have full res And QE/CI on your machine

Note:


1 - Edit:  it work without card bios you can skip bios step

2 - you can test other Fb and see the result I'm testing and will post here

3 - Edit: Here is the specific boot file for our Graphic card (thanks to checcco to compile this )

Extract downloaded file to downloads in home

Run terminal and put:

sudo cp /Users/your user name /Downloads/boot /

 boot.zip   192.32K   599 downloads

4- this is my DisplayProductID-717 but i advice you to edit your own file step by step with Guide

if you have problem put your info here i will edit it

(if you have N61jq you can test this file (it's better to make your own) other must make their own

 DisplayProductID_717.zip   507bytes   528 downloads
--------------------------------------------------------------------------------
EDIT(3/14/2011):

I did  this tutorial it's do same as editing (step 5) so no difference between two methods.

so not important

---------------------------------------------------------------------------------
those above guide doesn't provide full performance of our card doing theses guide enable the card but  fully


a guy  name mucha write a full guide  
my English isn't good need your help  to do this two guide

http://www.insanelymac.com/forum/index.php?showtopic=249642

http://www.insanelymac.com/forum/index.php?showtopic=252061

[atlee]

mojtabazarei, on Mar 10 2011, 05:49 PM, said:

After too many test i have 5730 work on N61jq Ati 5730 m

1.install 10.6.6

2.Before reboot install Lion's ATI5000, ATISupport and ATIFramebuffer

3.Dump your Card bios & Rename the dumped bios 1002_68co.rom and put it in your Extra folder

(Work without bios )

3.install Chameleon 2.0 RC5 - ATI Experimental in multibeast 3.3 (kabyl code added)

4. Do this for you LCD (Thanks man for the guide ) (most important )

5.Use this command in com.apple.boot.plist in Extra folder

<key>GraphicsEnabler</key>
	 <string>Yes</string>
 <key>AtiConfig</key>
	 <string>Hoolock</string>
 <key>UseAtiROM</key>
	 <string>Yes</string>

Now you have full res And QE/CI on your machine

Note:


1 -   it work without card bios

2 - you can test other Fb and see the result I'm testing and will post here

3 - who can help to make our specific Boot file?

Test DVD Player and Frontrow, If cannot run change your FB to Eulemur.

[mojtabazarei]

atlee, on Mar 10 2011, 11:21 AM, said:

Test DVD Player and Frontrow, If cannot run change your FB to Eulemur.

i can  run all of them and have DASHBOARD WATER RIPPLE EFFECTS

[checcco]

I'll be glad to compile a boot file for you as soon as I get back home... What's your device ID?

[mojtabazarei]

checcco, on Mar 10 2011, 01:02 PM, said:

I'll be glad to compile a boot file for you as soon as I get back home... What's your device ID?

Device id :0x68CO

And thanks for your help

[hjs89]

mojtabazarei, on Mar 10 2011, 06:49 AM, said:

4. Do this for your LCD (Thanks man for the guide ) (most important )

What did you exactly do? When I try to do CharredPC's tutorial I can't find IODisplayEDID and AppleBlacklightDisplay. Looking in the ioreg I can see the edid of my monitor.

My internal display is working but with wrong colors, the resolution it's ok.

[checcco]

hjs89, on Mar 10 2011, 12:46 PM, said:

What did you exactly do? When I try to do CharredPC's tutorial I can't find IODisplayEDID and AppleBlacklightDisplay. Looking in the ioreg I can see the edid of my monitor.

My internal display is working but with wrong colors, the resolution it's ok.

I can help... Did you manage to get vendor and product ID?

mojtabazarei, on Mar 10 2011, 12:24 PM, said:

Device id :0x68CO

And thanks for your help

I noticed that here and in your tutorial you keep writing 0x68CO while it should be 0x68C0 (ending with zero), inexpert people could get confused.

[mojtabazarei]

checcco, on Mar 10 2011, 03:27 PM, said:

I can help... Did you manage to get vendor and product ID?



I noticed that here and in your tutorial you keep writing 0x68CO while it should be 0x68C0 (ending with zero), inexpert people could get confused.

oh i'm sorry

thanks

checcco, on Mar 10 2011, 03:27 PM, said:

I can help... Did you manage to get vendor and product ID?



I noticed that here and in your tutorial you keep writing 0x68CO while it should be 0x68C0 (ending with zero), inexpert people could get confused.

oh i'm sorry

thanks

hjs89, on Mar 10 2011, 03:16 PM, said:

What did you exactly do? When I try to do CharredPC's tutorial I can't find IODisplayEDID and AppleBlacklightDisplay. Looking in the ioreg I can see the edid of my monitor.

My internal display is working but with wrong colors, the resolution it's ok.

may you put your ioregdump here

and did you use ELDM-EDID viewer in windows to get EDID

[hjs89]

mojtabazarei, on Mar 10 2011, 01:42 PM, said:

oh i'm sorry

thanks



oh i'm sorry

thanks



may you put your ioregdump here

and did you use ELDM-EDID viewer in windows to get EDID

Now I'm in other pc, so after I'll post my ioreg. What you want to see exactly?

I've dumped my Edid from windows, from osx with Switchres, and the EDID that I can see in IOreg. Always is the same hex code,

[hjs89]

That is the part of the ioreg about display0 (internal), the EDID is the same that I've extracted before. I've attached the full ioreg dump.

	| |   |   | |   +-o display0  <class IODisplayConnect, id 0x100000358, registered, matched, active, busy 0 (5 ms), retain 5>
	| |   |   | |   | | {
	| |   |   | |   | | }
	| |   |   | |   | | 
	| |   |   | |   | +-o AppleDisplay  <class AppleDisplay, id 0x10000035a, registered, matched, active, busy 0 (1 ms), retain 6>
	| |   |   | |   |	 {
	| |   |   | |   |	   "IOClass" = "AppleDisplay"
	| |   |   | |   |	   "CFBundleIdentifier" = "com.apple.iokit.IOGraphicsFamily"
	| |   |   | |   |	   "IOProviderClass" = "IODisplayConnect"
	| |   |   | |   |	   "DisplayProductID" = 4332
	| |   |   | |   |	   "IODisplayEDID" = <00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a>
	| |   |   | |   |	   "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEGP@1/IOPCI2PCIBridge/VGA@0/ATY,ATY,RadeonFramebuffer@0/ATY_ATY,RadeonFramebuffer/display0/AppleDisplay-6af-10ec"
	| |   |   | |   |	   "IOPowerManagement" = {"CurrentPowerState"=3}
	| |   |   | |   |	   "IOProbeScore" = 2000
	| |   |   | |   |	   "IODisplayParameters" = {"ggsc"={"min"=0,"max"=65536,"value"=65536},"thrm"={"min"=0,"max"=120,"value"=67},"bklt"={"min"=0,"max"=255,"value"=255},"rgsc"={"min"=0,"max"=65536,"value"=65536},"bgsc"={"min"=0,"max"=65536,"value"=65536},"dith"={"min"=0,"max"=1,"value"=1}}
	| |   |   | |   |	   "IOMatchCategory" = "IODefaultMatchCategory"
	| |   |   | |   |	   "AppleDisplayType" = 2
	| |   |   | |   |	   "AppleSense" = 37119
	| |   |   | |   |	   "IODisplayConnectFlags" = <c4490000>
	| |   |   | |   |	   "DisplayVendorID" = 1711

What did you do exactly?

Attached Files

•  ioreg.txt   1.06MB   11 downloads

[mojtabazarei]

hjs89, on Mar 10 2011, 09:02 PM, said:

That is the part of the ioreg about display0 (internal), the EDID is the same that I've extracted before. I've attached the full ioreg dump.

	| |   |   | |   +-o display0  <class IODisplayConnect, id 0x100000358, registered, matched, active, busy 0 (5 ms), retain 5>
	 | |   |   | |   | | {
	 | |   |   | |   | | }
	 | |   |   | |   | | 
	 | |   |   | |   | +-o AppleDisplay  <class AppleDisplay, id 0x10000035a, registered, matched, active, busy 0 (1 ms), retain 6>
	 | |   |   | |   |	 {
	 | |   |   | |   |	   "IOClass" = "AppleDisplay"
	 | |   |   | |   |	   "CFBundleIdentifier" = "com.apple.iokit.IOGraphicsFamily"
	 | |   |   | |   |	   "IOProviderClass" = "IODisplayConnect"
	 | |   |   | |   |	   "DisplayProductID" = 4332
	 | |   |   | |   |	   "IODisplayEDID" = <00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a>
	 | |   |   | |   |	   "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEGP@1/IOPCI2PCIBridge/VGA@0/ATY,ATY,RadeonFramebuffer@0/ATY_ATY,RadeonFramebuffer/display0/AppleDisplay-6af-10ec"
	 | |   |   | |   |	   "IOPowerManagement" = {"CurrentPowerState"=3}
	 | |   |   | |   |	   "IOProbeScore" = 2000
	 | |   |   | |   |	   "IODisplayParameters" = {"ggsc"={"min"=0,"max"=65536,"value"=65536},"thrm"={"min"=0,"max"=120,"value"=67},"bklt"={"min"=0,"max"=255,"value"=255},"rgsc"={"min"=0,"max"=65536,"value"=65536},"bgsc"={"min"=0,"max"=65536,"value"=65536},"dith"={"min"=0,"max"=1,"value"=1}}
	 | |   |   | |   |	   "IOMatchCategory" = "IODefaultMatchCategory"
	 | |   |   | |   |	   "AppleDisplayType" = 2
	 | |   |   | |   |	   "AppleSense" = 37119
	 | |   |   | |   |	   "IODisplayConnectFlags" = <c4490000>
	 | |   |   | |   |	   "DisplayVendorID" = 1711

What did you do exactly?

now what is your problem just color on internal display?

you have all things you want did you create your file by the guide

[hjs89]

mojtabazarei, on Mar 10 2011, 06:49 PM, said:

now what is your problem just color on internal display?

you have all things you want did you create your file by the guide

That's what I can see, obviously something is wrong hehe


I did a folder named DisplayVendorID-6af with a file named DisplayProductID-10ec with this code:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	 <key>DisplayProductID</key>
	 <integer>10ec</integer>
	 <key>DisplayProductName</key>
	 <string>Internal LCD Forced EDID</string>
	 <key>DisplayVendorID</key>
	 <integer>6af</integer>
	 <key>IODisplayEDID</key>
	 <data>00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a</data>
</dict>
</plist>

But nothing happens, in System Profile the display is named as Display in place of LCD Forced EDID.

[mojtabazarei]

hjs89, on Mar 10 2011, 09:36 PM, said:

That's what I can see, obviously something is wrong hehe


I did a folder named DisplayVendorID-6af with a file named DisplayProductID-10ec with this code:

<?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
	  <key>DisplayProductID</key>
	  <integer>10ec</integer>
	  <key>DisplayProductName</key>
	  <string>Internal LCD Forced EDID</string>
	  <key>DisplayVendorID</key>
	  <integer>6af</integer>
	  <key>IODisplayEDID</key>
	  <data>00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a</data>
 </dict>
 </plist>

But nothing happens, in System Profile the display is named as Display in place of LCD Forced EDID.

you did this wrong so i make it and attach here for you and test?

hjs89, on Mar 10 2011, 09:36 PM, said:

That's what I can see, obviously something is wrong hehe


I did a folder named DisplayVendorID-6af with a file named DisplayProductID-10ec with this code:

<?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
	  <key>DisplayProductID</key>
	  <integer>10ec</integer>
	  <key>DisplayProductName</key>
	  <string>Internal LCD Forced EDID</string>
	  <key>DisplayVendorID</key>
	  <integer>6af</integer>
	  <key>IODisplayEDID</key>
	  <data>00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a</data>
 </dict>
 </plist>

But nothing happens, in System Profile the display is named as Display in place of LCD Forced EDID.

you did this wrong so i make it and attach here for you and test?

hjs89, on Mar 10 2011, 09:36 PM, said:

That's what I can see, obviously something is wrong hehe


I did a folder named DisplayVendorID-6af with a file named DisplayProductID-10ec with this code:

<?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
	  <key>DisplayProductID</key>
	  <integer>10ec</integer>
	  <key>DisplayProductName</key>
	  <string>Internal LCD Forced EDID</string>
	  <key>DisplayVendorID</key>
	  <integer>6af</integer>
	  <key>IODisplayEDID</key>
	  <data>00ffffffffffff0006afec100000000001120103802213780ae6b5a3574f94261e505400000001010101010101010101010101010101201c5678500026303020340058c1100000180000000f0000000000000000000000000020000000fe0041554f0a202020202020202020000000fe004231353658573031205630200a002a</data>
 </dict>
 </plist>

But nothing happens, in System Profile the display is named as Display in place of LCD Forced EDID.

you did this wrong so i make it and attach here for you and test?

[hjs89]

Thank you. But I can't see the attached file.  

[mojtabazarei]

hjs89, on Mar 10 2011, 09:57 PM, said:

Thank you. But I can't see the attached file.  

copy this file in DisplayVendorID-6af
 DisplayProductID_10ec.zip   495bytes   84 downloads

[checcco]

As I promised here's the boot file.

I put Hoolock as default framebuffer and Redwood as chipset (I hope it's right)
 boot.zip   192.32K   86 downloads

[mojtabazarei]

checcco, on Mar 10 2011, 11:05 PM, said:

As I promised here's the boot file.

I put Hoolock as default framebuffer and Redwood as chipset (I hope it's right)
boot.zip

thank a lot i will test it

[hjs89]

mojtabazarei, on Mar 10 2011, 07:55 PM, said:

copy this file in DisplayVendorID-6af
DisplayP...tID_10ec.zip

Thank you. I tested it and now the display is named Internal LCD Forced EDID but the same happens.

[mojtabazarei]

hjs89, on Mar 10 2011, 11:12 PM, said:

Thank you. I tested it and now the display is named Internal LCD Forced EDID but the same happens.

are you sure the info you posted here is correct please use ELDIM_EDID viewer in windows and

attach  the result here

[atlee]

hjs89, on Mar 11 2011, 05:06 AM, said:

That's what I can see, obviously something is wrong hehe



But nothing happens, in System Profile the display is named as Display in place of LCD Forced EDID.

You should not need EDID, or EFI stuff here. If you get that screen that looks messy, fuzzy, remove your dsdt.aml and restart and see if that changes anything. Some DSDT fixes rename. GFX to P0P3.
But if you remove your DSDT make sure you place the right kexts back in your Extra's folder so you can boot properly.

If I use a patched dsdt.aml that edit the GFX string it will go fuzzy, my theory anyway. I have tested twice with an edited DSDT that renames the GFX string, Goes fuzzy, sometimes just a blank screen. Hope this helps you.

@ mojtabazarei you should credit checcco for helping you to succeed in full resolution and qe/ci