matrix4you Posted September 7, 2010 Share Posted September 7, 2010 Hello, on my Fujitsu Lifebook E780 with NVIDIA GF GT 330M i have a black screen after install drivers, enablers or injectors. An external Monitor works with OpenGL / QE. Tested Systems are iAtkos S3 and iPortable (10.6.4)! Extracted DSDT with NVIDIA Laptop hack does not work! I have add the hack into the PEGP block but no changes! I think the dsdt.aml does not use / ignore the hack! Is it possible to change the NVCAP like by the Sony Vaio in this Post: The VGA-BioS PE /*have i read out and the NVCAP value with NVCAP Maker generated: 0400000000000100000000000000000700000000 The ATY_Init.kext with the NVCAP key does not work! Any Ideas? Thanks much for answers! dsdt.zip Quote Link to comment Share on other sites More sharing options...
matrix4you Posted September 8, 2010 Author Share Posted September 8, 2010 If it helps! NVEnabler puts out: NVEnabler: found LVDS NVEnabler: Channel 1: 02 NVEnabler: Channel 2: 3d I used this Values in the NVCAP. But always the same. External monitor goes, not internal! Quote Link to comment Share on other sites More sharing options...
matrix4you Posted September 13, 2010 Author Share Posted September 13, 2010 I now sometimes seen with nVidia Info. The LVDS is put at 2, it means that the "Output Group 1" yes on 02 steehgen must / should: Interesting that so many entries are there, right? The rom of the video card and the EDID I once attached! Still have hope! I also have a plist with at. With the settings remain the LCD / DFP also black. The external is then blue! Is there any way that I get with the default drivers (GraphicsEnabler = No) at least the resolution of 1600x900. Would then dispense it without external monitor on QE! In the Graphics Mode boot.plist I have set to 1600x900x32. The highest what I get is 1280x800, before it was 1024x768! just everything is very weird because MacBooks have the card in there, too! files.zip Quote Link to comment Share on other sites More sharing options...
matrix4you Posted September 14, 2010 Author Share Posted September 14, 2010 After a tip from peach-os I now run a retail 10.6.4 install! http://www.insanelymac.com/forum/index.php...=218555&hl= If everything goes very stable. Graphic is unfortunately still lacking. The annex my new dsdt files! dsdt_fj_e780.zip Quote Link to comment Share on other sites More sharing options...
peach-os Posted September 14, 2010 Share Posted September 14, 2010 try this one - no strings, no GraphicsEnabler or patched kexts ! DSDT_fuji.aml.zip lucky if it works - I´m pretty sure you still have to edit the NVCAP - you will find it before Device (CRT) Quote Link to comment Share on other sites More sharing options...
matrix4you Posted September 16, 2010 Author Share Posted September 16, 2010 It does not work! Here the new dump Files! Interfaces.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.