naton Posted May 11, 2012 Share Posted May 11, 2012 Micky1979 I feel your pain. I have an HP laptop too. Beside Intel's WiFi, the only other WiFi that will work on the HP 610 is the Broadcom BCM4312. I tried adding it the plist file, but without any luck. Lion refuses to load the drivers for it. Link to comment Share on other sites More sharing options...
LatinMcG Posted May 12, 2012 Share Posted May 12, 2012 ar5b91 half size works fine. Link to comment Share on other sites More sharing options...
Micky1979 Posted May 20, 2012 Share Posted May 20, 2012 Micky1979 I feel your pain. I have an HP laptop too. Beside Intel's WiFi, the only other WiFi that will work on the HP 610 is the Broadcom BCM4312. I tried adding it the plist file, but without any luck. Lion refuses to load the drivers for it. ar5b91 half size works fine. I installed Ubuntu 12.04, but I get this error: Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Arresto. I think the new kernel does not support this work in Ubuntu 12.04 Any tips? @LatinMcG, I confirm that AR5b91 works in OSX 10.7.3 and 10.7.4 without hacks! (original kext) Look at the pictures, the work I have done on card, because I thought he had the connectors in the right place............. but it works ..... ...................I will buy the right one if the rebrand work Link to comment Share on other sites More sharing options...
LatinMcG Posted May 21, 2012 Share Posted May 21, 2012 cant rebrand atheros 9k chips that i know off..dsdt rebranding.. subsystem 0F to get a reall apple ar9280 u need ar5bxb92 Link to comment Share on other sites More sharing options...
Micky1979 Posted May 24, 2012 Share Posted May 24, 2012 cant rerand atheros 9k chips that i know off..dsdt rebranding.. subsystem 0F to get a reall apple ar9280 u need ar5bxb92 I realized why I always get error reading the rom , but I asked for a card to rebrand as possible to overtake HP bios whitelist, I misunderstood what you said i need a card Atheros or Broadcom that I can rebrand as HP, not Apple thanks anyway Link to comment Share on other sites More sharing options...
LatinMcG Posted May 24, 2012 Share Posted May 24, 2012 atheros ar5bxb62 rebrands.. and bcm94321mcp is a hp version. but subsystem id likely not in whitelist.. get whitelist removed in bios if possible. (and it is . flash bios bellow) edit: and it is original> sp55068.exe = whitelist removed> http://www.bios-mods...itelist-removal will fail if HP TOOL partition present. Link to comment Share on other sites More sharing options...
PumaTechTV Posted May 31, 2012 Share Posted May 31, 2012 Rebranding was a success, but os x had a probelm. OS X 10.6.1 HAZARD wont reconginze, or even see, the wifi card. Terminal cant see it, nor can system profiler. The card works fine in windows and ubuntu, so I am wondering why it isn't working here. I can supply any info needed, from ubuntu lspci -vvnn, to os x's terminal commands. I an laso able to take pictures. Somebody please help me! Here is my lspci -vvnn 02:00.0 Network controller [0280]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) Subsystem: Apple Inc. Device [106b:004e] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d2600000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [90] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000000 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Kernel driver in use: ath5k Kernel modules: ath5k Link to comment Share on other sites More sharing options...
LatinMcG Posted June 1, 2012 Share Posted June 1, 2012 Here is my lspci -vvnn 02:00.0 Network controller [0280]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) Subsystem: Apple Inc. Device [106b:00[b]4e[/b]] another broadcom 4E i hope its not AR5bxb[b]3[/b] = trash Link to comment Share on other sites More sharing options...
PumaTechTV Posted June 1, 2012 Share Posted June 1, 2012 another broadcom 4E i hope its not AR5bxb3 = trash Don't worry, it's not one of those evil cards! BTW eeprom shows the card as a g only card (although the sticker in the card says it is b/g). Thanks in advance Link to comment Share on other sites More sharing options...
LatinMcG Posted June 1, 2012 Share Posted June 1, 2012 Don't worry, it's not one of those evil cards! BTW eeprom shows the card as a g only card (although the sticker in the card says it is b/g). Thanks in advance post all stickers info. Link to comment Share on other sites More sharing options...
virgo75 Posted October 29, 2012 Share Posted October 29, 2012 help please sudo ath_info -v -w 0xd9300000 0x0200 0x0280 GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x00000009 #DBG main: new MAC a3 (>= AR5213) set GPIO4 to low #DBG main: old GPIO CR 00000000 DO 00000000 DI 00000009 #DBG main: GPIO CR 0 -> 300 #DBG main: new GPIO CR 00000300 DO 00000000 DI 00000009 #ERR do_write_pairs: offset 0x0200 in CRC protected area is not supported #DBG main: restoring GPIO CR 300 -> 0 Link to comment Share on other sites More sharing options...
LatinMcG Posted November 2, 2012 Share Posted November 2, 2012 help please sudo ath_info -v -w 0xd9300000 0x0200 0x0280 GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x00000009 #DBG main: new MAC a3 (>= AR5213) set GPIO4 to low #DBG main: old GPIO CR 00000000 DO 00000000 DI 00000009 #DBG main: GPIO CR 0 -> 300 #DBG main: new GPIO CR 00000300 DO 00000000 DI 00000009 #ERR do_write_pairs: offset 0x0200 in CRC protected area is not supported #DBG main: restoring GPIO CR 300 -> 0 i think youre doing it wrong 0x200 ? post your atheros card table. for atheros AR92xx u need 10.6.3 + Link to comment Share on other sites More sharing options...
virgo75 Posted November 7, 2012 Share Posted November 7, 2012 thanks for reply LatinMcG anto@ubuntu:~/madwifi$ sudo ath_info 0xd9300000 -==Device Information==- MAC Revision: 5414 (0xa3) Warning: Invalid EEPROM Magic number! Device type: 3 5GHz PHY Revision: 5424 (0xa2) 2GHz PHY Revision: 5424 (0xa2) /============== EEPROM Information =============\ | EEPROM Version: 5.3 | EEPROM Size: 4 kbit | | EEMAP: 2 | Reg. Domain: 0x00 | |================= Capabilities ================| | 802.11a Support: yes | Turbo-A disabled: yes | | 802.11b Support: yes | Turbo-G disabled: no | | 802.11g Support: yes | 2GHz XR disabled: no | | RFKill Support: no | 5GHz XR disabled: no | | 32kHz Crystal: no | | \===============================================/ /=========================================================\ | Calibration data common for all modes | |=========================================================| | CCK/OFDM gain delta: 1 | | CCK/OFDM power delta: 5 | | Scaled CCK delta: 5 | | 2GHz Antenna gain: 0 | | 5GHz Antenna gain: 0 | | Turbo 2W maximum dBm: 38 | | Target power start: 0x1b7 | | EAR Start: 0x219 | \=========================================================/ /=========================================================\ | Calibration data for 802.11a operation | |=========================================================| | I power: 0x08 | Q power: 0x1f | | Use fixed bias: 0x00 | Max turbo power: 0x26 | | Max XR power: 0x1e | Switch Settling Time: 0x2d | | Tx/Rx attenuation: 0x2e | TX end to XLNA On: 0x02 | | TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e | | 62db Threshold: 0x0f | XLNA gain: 0x0d | | XPD: 0x01 | XPD gain: 0x0a | | I gain: 0x00 | Tx/Rx margin: 0x13 | | False detect backoff: 0x00 | Noise Floor Threshold: -54 | | ADC desired size: -32 | PGA desired size: -80 | |=========================================================| | Antenna control 0: 0x00 | Antenna control 1: 0x01 | | Antenna control 2: 0x26 | Antenna control 3: 0x26 | | Antenna control 4: 0x06 | Antenna control 5: 0x06 | | Antenna control 6: 0x02 | Antenna control 7: 0x25 | | Antenna control 8: 0x25 | Antenna control 9: 0x05 | | Antenna control 10: 0x05 | Antenna control 11: 0x00 | |=========================================================| | Octave Band 0: 5 | db 0: 5 | | Octave Band 1: 5 | db 1: 5 | | Octave Band 2: 5 | db 2: 5 | | Octave Band 3: 5 | db 3: 5 | \=========================================================/ /==================== Turbo mode infos ===================\ | Switch Settling time: 0x5a | Tx/Rx margin: 0x13 | | Tx/Rx attenuation: 0x2e | ADC desired size: -32 | | PGA desired size: -80 | | \=========================================================/ /============== Per rate power calibration ===========\ | Freq | 6-24Mbit/s | 36Mbit/s | 48Mbit/s | 54Mbit/s | |======|============|==========|===========|==========| | 4900 | 15.00 | 14.00 | 12.00 | 11.00 | |======|============|==========|===========|==========| | 5180 | 17.00 | 16.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5240 | 17.00 | 16.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5320 | 17.00 | 16.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5500 | 17.00 | 16.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5700 | 17.00 | 16.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5745 | 15.00 | 15.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5825 | 15.00 | 15.00 | 14.00 | 13.00 | |======|============|==========|===========|==========| | 5360 | 18.00 | 18.00 | 18.00 | 18.00 | |======|============|==========|===========|==========| | 5720 | 18.00 | 18.00 | 18.00 | 18.00 | \=====================================================/ /====================== Per channel power calibration ===================\ | Freq | pwr_i | pwr_0 | pwr_1 | pwr_2 | pwr_3 | | | pddac_i | pddac_0 | pddac_1 | pddac_2 | pddac_3 | |======|=========|=============|=============|=============|=============| | 4900 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 0 | 7 | 24 | 75 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.00 | 21.00 | 23.00 | | | 11 | 22 | 40 | 59 | 78 | |======|=========|=============|=============|=============|=============| | 5170 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 3 | 16 | 43 | 95 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.50 | 22.00 | 24.00 | | | 14 | 27 | 53 | 83 | 105 | |======|=========|=============|=============|=============|=============| | 5300 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.50 | 9.00 | 13.00 | 0.00 | | | 7 | 22 | 57 | 103 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.00 | 21.50 | 23.00 | | | 17 | 33 | 53 | 84 | 98 | |======|=========|=============|=============|=============|=============| | 5400 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.50 | 9.00 | 13.50 | 0.00 | | | 6 | 22 | 59 | 60 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.50 | 17.50 | 21.00 | 22.50 | | | 17 | 33 | 55 | 84 | 95 | |======|=========|=============|=============|=============|=============| | 5500 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.50 | 9.00 | 13.50 | 0.00 | | | 7 | 24 | 63 | 118 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 17.50 | 20.50 | 22.00 | | | 19 | 32 | 57 | 81 | 94 | |======|=========|=============|=============|=============|=============| | 5650 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 7 | 22 | 55 | 107 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.50 | 17.50 | 20.50 | 22.00 | | | 19 | 35 | 56 | 87 | 99 | |======|=========|=============|=============|=============|=============| | 5725 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.50 | 9.00 | 13.00 | 0.00 | | | 6 | 22 | 51 | 111 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 13.00 | 17.00 | 20.50 | 22.00 | | | 18 | 29 | 54 | 88 | 105 | |======|=========|=============|=============|=============|=============| | 5825 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 2 | 15 | 42 | 94 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 13.50 | 17.50 | 20.00 | 22.00 | | | 16 | 30 | 57 | 85 | 107 | \========================================================================/ /=========================================================\ | Calibration data for 802.11b operation | |=========================================================| | I power: 0x00 | Q power: 0x00 | | Use fixed bias: 0x00 | Max turbo power: 0x00 | | Max XR power: 0x00 | Switch Settling Time: 0x28 | | Tx/Rx attenuation: 0x1c | TX end to XLNA On: 0x02 | | TX end to XPA Off: 0x00 | TX end to XPA On: 0x07 | | 62db Threshold: 0x1c | XLNA gain: 0x0d | | XPD: 0x01 | XPD gain: 0x0a | | I gain: 0x00 | Tx/Rx margin: 0x14 | | False detect backoff: 0x00 | Noise Floor Threshold: -1 | | ADC desired size: -38 | PGA desired size: -80 | |=========================================================| | Antenna control 0: 0x00 | Antenna control 1: 0x0d | | Antenna control 2: 0x2a | Antenna control 3: 0x2a | | Antenna control 4: 0x22 | Antenna control 5: 0x22 | | Antenna control 6: 0x0e | Antenna control 7: 0x29 | | Antenna control 8: 0x29 | Antenna control 9: 0x21 | | Antenna control 10: 0x21 | Antenna control 11: 0x00 | |=========================================================| | Octave Band 0: 5 | db 0: 5 | | Octave Band 1: 5 | db 1: 5 | | Octave Band 2: 0 | db 2: 0 | | Octave Band 3: 0 | db 3: 0 | \=========================================================/ /============== Per rate power calibration ===========\ | Freq | 1Mbit/s | 2Mbit/s | 5.5Mbit/s | 11Mbit/s | |======|============|==========|===========|==========| | 2412 | 18.00 | 18.00 | 18.00 | 18.00 | |======|============|==========|===========|==========| | 2484 | 18.00 | 18.00 | 18.00 | 18.00 | \=====================================================/ /====================== Per channel power calibration ===================\ | Freq | pwr_i | pwr_0 | pwr_1 | pwr_2 | pwr_3 | | | pddac_i | pddac_0 | pddac_1 | pddac_2 | pddac_3 | |======|=========|=============|=============|=============|=============| | 2412 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 0 | 3 | 10 | 35 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.00 | 21.50 | 24.50 | | | 5 | 12 | 21 | 37 | 58 | |======|=========|=============|=============|=============|=============| | 2472 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 1 | 3 | 13 | 39 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.00 | 21.50 | 24.00 | | | 5 | 12 | 24 | 40 | 58 | |======|=========|=============|=============|=============|=============| | 2484 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 13.00 | 0.00 | | | 1 | 4 | 16 | 42 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 14.00 | 18.00 | 22.00 | 24.50 | | | 6 | 13 | 24 | 42 | 58 | \========================================================================/ /=========================================================\ | Calibration data for 802.11g operation | |=========================================================| | I power: 0x00 | Q power: 0x10 | | Use fixed bias: 0x01 | Max turbo power: 0x26 | | Max XR power: 0x24 | Switch Settling Time: 0x28 | | Tx/Rx attenuation: 0x1c | TX end to XLNA On: 0x02 | | TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e | | 62db Threshold: 0x1c | XLNA gain: 0x0d | | XPD: 0x01 | XPD gain: 0x0a | | I gain: 0x00 | Tx/Rx margin: 0x14 | | False detect backoff: 0x00 | Noise Floor Threshold: -1 | | ADC desired size: -38 | PGA desired size: -80 | |=========================================================| | Antenna control 0: 0x00 | Antenna control 1: 0x0d | | Antenna control 2: 0x2a | Antenna control 3: 0x2a | | Antenna control 4: 0x22 | Antenna control 5: 0x22 | | Antenna control 6: 0x0e | Antenna control 7: 0x29 | | Antenna control 8: 0x29 | Antenna control 9: 0x21 | | Antenna control 10: 0x21 | Antenna control 11: 0x05 | |=========================================================| | Octave Band 0: 5 | db 0: 5 | | Octave Band 1: 5 | db 1: 5 | | Octave Band 2: 0 | db 2: 0 | | Octave Band 3: 0 | db 3: 0 | \=========================================================/ /==================== Turbo mode infos ===================\ | Switch Settling time: 0x28 | Tx/Rx margin: 0x14 | | Tx/Rx attenuation: 0x1c | ADC desired size: -32 | | PGA desired size: -80 | | \=========================================================/ /============== Per rate power calibration ===========\ | Freq | 6-24Mbit/s | 36Mbit/s | 48Mbit/s | 54Mbit/s | |======|============|==========|===========|==========| | 2412 | 18.00 | 17.00 | 15.00 | 14.00 | |======|============|==========|===========|==========| | 2437 | 18.00 | 17.00 | 15.00 | 14.00 | |======|============|==========|===========|==========| | 2472 | 18.00 | 17.00 | 15.00 | 14.00 | \=====================================================/ /====================== Per channel power calibration ===================\ | Freq | pwr_i | pwr_0 | pwr_1 | pwr_2 | pwr_3 | | | pddac_i | pddac_0 | pddac_1 | pddac_2 | pddac_3 | |======|=========|=============|=============|=============|=============| | 2412 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 12.50 | 0.00 | | | 0 | 2 | 11 | 33 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 13.50 | 17.50 | 21.00 | 22.50 | | | 4 | 10 | 23 | 38 | 49 | |======|=========|=============|=============|=============|=============| | 2442 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 12.50 | 0.00 | | | 0 | 0 | 11 | 35 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 13.50 | 17.00 | 21.00 | 22.50 | | | 4 | 10 | 22 | 39 | 51 | |======|=========|=============|=============|=============|=============| | 2472 | | | | | | |------|---------|-------------|-------------|-------------|-------------| | | 0 | 4.00 | 8.50 | 12.50 | 0.00 | | | 5 | 8 | 19 | 43 | 0 | |------|---------|-------------|-------------|-------------|-------------| | | 10 | 13.50 | 17.00 | 20.50 | 21.50 | | | 6 | 13 | 24 | 38 | 47 | \========================================================================/ GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x00000009 STA_ID0: 00:17:f2:42:82:c4 STA_ID1: 0x1a80c482, AP: 0, IBSS: 0, KeyCache Disable: 0 TIMER0: 0x00000030, TBTT: 48, TU: 0x00290030 TIMER1: 0x0007ffff, DMAb: 65535, TU: 0x0028ffff (-49) TIMER2: 0x01ffffff, SWBA: 65535, TU: 0x003fffff (+1507279) TIMER3: 0x00000031, ATIM: 49, TU: 0x00290031 (+1) TSF: 0x00000000a26f5cba, TSFTU: 39895, TU: 0x00289bd7 BEACON: 0x00000000 LAST_TSTP: 0x6fefdfff 04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) Subsystem: Apple Inc. AR5BXB6 802.11abg Wireless Mini PCIe Card [106b:0086] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d9300000 (64-bit, non-prefetchable) Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [90] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000000 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Kernel driver in use: ath5k Kernel modules: ath5k Link to comment Share on other sites More sharing options...
LatinMcG Posted November 7, 2012 Share Posted November 7, 2012 no i mean the registers table.. the eprom dump.. the ones u use to change the info 0x0200 ? i would just get ar5B91 and problems are over. Link to comment Share on other sites More sharing options...
virgo75 Posted November 9, 2012 Share Posted November 9, 2012 if I understand you want to see this EEPROM dump (512 bytes) ============================================== 0000: a55a 0000 0040 0001 0000 5001 0000 0086 0008: 106b 1c0a 0100 0000 01c2 0002 c606 0001 0010: 0000 0000 0000 0000 0000 0000 0000 0000 0018: 0000 0000 0000 0000 0000 82c4 f242 0017 0020: 0000 0000 0000 0000 0000 0000 0000 0000 0028: 0000 0000 0000 0000 0000 0000 0000 0000 0030: 0000 0000 0000 0000 0000 0000 0000 0000 0038: 0000 0000 0000 0000 0000 0000 0000 0000 0040: ffff ffff ffff ffff ffff ffff ffff ffff 0048: ffff ffff ffff ffff ffff ffff ffff ffff 0050: ffff ffff ffff ffff ffff ffff ffff ffff 0058: ffff ffff ffff ffff ffff ffff ffff ffff 0060: ffff ffff ffff ffff ffff ffff ffff ffff 0068: ffff ffff ffff ffff ffff ffff ffff ffff 0070: ffff ffff ffff ffff ffff ffff ffff ffff 0078: ffff ffff ffff ffff ffff ffff ffff ffff 0080: 1400 168c 001c 1402 0001 0200 140a 5001 0088: 0000 140b 106b 0086 140f 0100 1c0a 1410 0090: 5001 01c2 15c3 3f01 0f00 1419 0cc0 0504 0098: ffff ffff ffff ffff ffff ffff ffff ffff 00a0: ffff ffff ffff ffff ffff 1700 42f2 c482 00a8: ffff ffff ffff ffff ffff ffff ffff ffff 00b0: ffff ffff ffff ffff ffff ffff ffff ffff 00b8: ffff ffff ffff ffff ffff ffff ffff 0000 00c0: 81e1 5003 9a67 0000 8219 01b7 00ff 54ff 00c8: 15a3 0001 0000 0000 0000 0000 0000 0000 00d0: 0000 0000 0000 0000 2db8 0066 9861 8296 00d8: 5145 e0b6 db6d 020f 000e b0ca 01b5 001e 00e0: 08f8 d693 c09d 0d61 0000 0000 0000 0000 00e8: 0000 0000 0000 0000 0000 0000 0000 0000 00f0: 0000 0000 2870 036a aa28 8ea6 9861 da55 00f8: 021c 0007 b0ff 01b5 002d 0000 ff70 14ff ============================================== Link to comment Share on other sites More sharing options...
LatinMcG Posted November 9, 2012 Share Posted November 9, 2012 so u want to change the 0200 to 0280 that is at 0x85 logic is 0x80 0x81 0x82 0x83 0x84 0x85 0x86 0x87 0x80: 1400 168c 001c 1402 0001 0200 140a 5001 0x88: ar5b91 wireless N draft http://www.ebay.it/s...=ar5b91&_sop=15 Numero oggetto: 290790234596 Link to comment Share on other sites More sharing options...
virgo75 Posted November 9, 2012 Share Posted November 9, 2012 ok thank you. then with my card I can not get it to work in any way Link to comment Share on other sites More sharing options...
LatinMcG Posted November 9, 2012 Share Posted November 9, 2012 was your id 1c0a ? or subvendor or subsys ? 0008: 106b 1c0a 0100 0000 01c2 0002 c606 0001 i stopped bothering with G speed cards most times.. easy way cheap way AR5B91 with 10.6.3+ Link to comment Share on other sites More sharing options...
amsart Posted February 15, 2013 Share Posted February 15, 2013 hey, i bought atheros ar5bxb112, but unfortunately, it's not OOB, and then i try lspci, and the result : Atheros Communications Inc. Unknown device [168c:abcd] (rev 01) i wanna know, can i rebranding this card ? Link to comment Share on other sites More sharing options...
LatinMcG Posted February 16, 2013 Share Posted February 16, 2013 hey, i bought atheros ar5bxb112, but unfortunately, it's not OOB, and then i try lspci, and the result : Atheros Communications Inc. Unknown device [168c:abcd] (rev 01) i wanna know, can i rebranding this card ? not to my knowledge.. anything higher than AR5BXB6 series changed an cant use old tools.. linux didnt develop it.. due to no need with new linux for driver to work in linux Link to comment Share on other sites More sharing options...
amsart Posted February 17, 2013 Share Posted February 17, 2013 not to my knowledge.. anything higher than AR5BXB6 series changed an cant use old tools.. linux didnt develop it.. due to no need with new linux for driver to work in linux damn, okay, thanks LatinMcG, I should buy another one I guess, the seller I bought this card is claime as the Apple Airport Card, unfortunately, He's lying... Link to comment Share on other sites More sharing options...
LatinMcG Posted February 17, 2013 Share Posted February 17, 2013 lots of people couldnt make the 112 work it has to be device id 30 not abcd and lion 10.7 or higher. not 10.6 snow leo try adding the device id to the info.plist of atheros40.kext what made u buy it ? read anywhere it works ? AR5B91 always worked for me device id 2A with 10.6.3 or higher http://www.insanelym...5bxb112-ar9380/ Atheros Communications Inc. AR9300 Wireless LAN adaptor [168c:0030] (rev 01) Subsystem: Apple Computer Inc. Device [106b:009a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at a8600000 (64-bit, non-prefetchable) Expansion ROM at 8f900000 [disabled] Capabilities: <access denied> Link to comment Share on other sites More sharing options...
Recommended Posts