jasx Posted August 4, 2008 Share Posted August 4, 2008 With nvinject 0.21 or 0.22 I'm unable to get hardware acceleration from my G80 nvidia 8800 GTX... I've tried screwing around with NVCAP... but I don't think thats the problem... All i can get in the System profiler for graphics is: Displays: Display: Resolution: 1280 x 1024 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Help me ... Link to comment Share on other sites More sharing options...
3Dman Posted August 4, 2008 Share Posted August 4, 2008 With nvinject 0.21 or 0.22 I'm unable to get hardware acceleration from my G80 nvidia 8800 GTX...I've tried screwing around with NVCAP... but I don't think thats the problem... All i can get in the System profiler for graphics is: Displays: Display: Resolution: 1280 x 1024 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Help me ... What's your release and version ? Link to comment Share on other sites More sharing options...
jasx Posted August 4, 2008 Author Share Posted August 4, 2008 I'm using Leo4All V3 / Leopard 10.5.2 Link to comment Share on other sites More sharing options...
3Dman Posted August 4, 2008 Share Posted August 4, 2008 I'm using Leo4All V3 / Leopard 10.5.2 Install Leopard graphics update then use nvinject . Link to comment Share on other sites More sharing options...
jasx Posted August 4, 2008 Author Share Posted August 4, 2008 I just installed the Leopard graphics update... kernel panicked right away, now I'm booting with -x flag and the resolution does work, but I can't do a regular boot.. I don't even see it trying to load nvinject, its complaining about NVResman.kext and GeForce kexts.. which are in the /System/Library/Extensions... should I remove these files? Here's a screenshot: Link to comment Share on other sites More sharing options...
jasx Posted August 4, 2008 Author Share Posted August 4, 2008 It works with Geforce.kext removed.. now I have the correct resolution, nvinject 0.2.2 is installed, the VRAM,totalisize is set, but i STILL cannot get Quartz Extreme or the Core Image to be Hardware Accelerated Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 768 MB Vendor: NVIDIA (0x10de) Device ID: 0x0191 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.2 Displays: VX2235wm-3: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected What could I be missing now? Edit: I just did a dmsg, and noticed this: display: family specific matching fails not sure if that could be the reason why it's not working... thought i'd include that here anyway Link to comment Share on other sites More sharing options...
jasx Posted August 5, 2008 Author Share Posted August 5, 2008 ***** SOLVED ***** So the problem was that Geforce.kext was causing the kernel panic... Can boot without it.. but that results in no Quartz Extreme, and no Hardware acceleration I spent a good week and a half raping the system and tried everything... I finally fixed the problem by editing 3 kexts: NVDANV50Hal.kext GeForce.kext NVinject.kext I made sure that the Device ID's in ALL 3 kexts were exactly the same.. and then set the IOProbeScore to 0 Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 768 MB Vendor: NVIDIA (0x10de) Device ID: 0x0191 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: VX2235wm-3: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Link to comment Share on other sites More sharing options...
Recommended Posts