Jump to content

ASRock P67 Pro3 DSDT+Patched Bios


haxzion
 Share

37 posts in this topic

Recommended Posts

:star_sunglasses:DSDT for the community Bios Ver 3.20 with all the common fixes plus:
-LPC-SBUS
-GIGE (for app store support)
-Sleep (enable the "No-Execute Memory Protecion" bios setting)
-PEG0 renamed to PEGP with generic HDMI (NVIDIA/AMD)
-HDEF (ALC892) layout 01
dsdt.aml320.zip


:star_sunglasses:Patched Bios Ver 3.20 to use with vanilla AICPM
3.20 patched.zip


:star_sunglasses:SSDT for I5 2400 (stock) - made with ssdtPRGen
ssdt2400 stock.zip

:star_sunglasses:If you have raid enabled (like i am) Intel 82801HB/IB ICH8/ICH9 - SATA RAID Controller (2822:8086)
get this AHCIPortInjector.kext.zip and place it in Extra/Extensions

:star_sunglasses:Sensors Fully working
This is actually kozlek HWSensors pack 5.1.63 with some edits to work with this board
ASRockP67 sensors.zip


If you have any questions let me know..Happy ihacks :thumbsup_anim:
Many thanks to the whole hackintosh community for their work and for sharing it with the rest..

post-32317-0-48722300-1369210116_thumb.jpgpost-32317-0-48595400-1369210226_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Install in plug in IoPlatformFamily ?

Hey friend can you write you kernel log with mrdumper kext?

Thanks

 

System/Library/Extensions/IOPlatformPluginFamily/Contents/Plugins/ACPI_SMC_PlatformPlugin/Contents/Resources

 

MSRDumper PStatesReached: 16 19 23 27 31 32 33 34

Link to comment
Share on other sites

Great Work TheDjey!! Thanks a lot, but I have only two questions,

Why Intel SATA AHCI is reported as ESB2 with your DSDT?

What version of FakeSMC are you using?

Thanx man.

Use the provided AHCIPortInjector.kext.zip or add the address of the ACHI controller to your dsdt.

I'm using raid0 so the address of the controller for me is different

 

The FakeSmC im testing right now is taken from:

http://www.insanelymac.com/forum/index.php?showtopic=275429&st=0

Link to comment
Share on other sites

Use the provided AHCIPortInjector.kext.zip or add the address of the ACHI controller to your dsdt. I'm using raid0 so the address of the controller for me is different The FakeSmC im testing right now is taken from: http://www.insanelymac.com/forum/index.php?showtopic=275429&st=0

 

Thanks, but AHCIPortInjector.kext. doesn´t work,

Where I add the address in my DSDT?

Link to comment
Share on other sites

Thanks, but AHCIPortInjector.kext. doesn´t work,

Where I add the address in my DSDT?

Did you add it in Extra/Extensions?

The address goes under Device (SAT0) but i haven't tried it since i don't need it.

Link to comment
Share on other sites

 

Did you add it in Extra/Extensions?

The address goes under Device (SAT0) but i haven't tried it since i don't need it.

 

I did it in System/Library/Extensions, I don´t have a Extensions folder in Extra.

Link to comment
Share on other sites

I did it in System/Library/Extensions, I don´t have a Extensions folder in Extra.

Well it doesn't work in S/L/E only E/E since it's an injector.Try to inject your controller from DSDT then.

Link to comment
Share on other sites

Ok, finally I can inject it in my DSDT, thank you very much.

But only 2 states in my 2500K CPU at 4.2 GHz (16,42)

I have a patched ROM and no SSDT, and this is my org.chameleon.Boot.plist:

 

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1920x1080x32</string>

<key>Kernel Flags</key>

<string>darkwake=0</string>

<key>KeyLayout</key>

<string>mac-es</string>

<key>SystemType</key>

<string>1</string>

<key>Theme</key>

<string>Choose_Your_OS(black)</string>

<key>Timeout</key>

<string>3</string>

<key>UseKernelCache</key>

<string>Yes</string>

Link to comment
Share on other sites

Ok, finally I can inject it in my DSDT, thank you very much.

But only 2 states in my 2500K CPU at 4.2 GHz (16,42)

I have a patched ROM and no SSDT, and this is my org.chameleon.Boot.plist:

 

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1920x1080x32</string>

<key>Kernel Flags</key>

<string>darkwake=0</string>

<key>KeyLayout</key>

<string>mac-es</string>

<key>SystemType</key>

<string>1</string>

<key>Theme</key>

<string>Choose_Your_OS(black)</string>

<key>Timeout</key>

<string>3</string>

<key>UseKernelCache</key>

<string>Yes</string>

 

-U need to make a custom SSDT for your cpu since u got it OCed

-In order to get more than 2 Pstates you need to follow my little guide above.

-EthernetBuiltIn you don't need this with my DSDT i have it patched.

-darkwake=0 you don't need this either

Link to comment
Share on other sites

Funk but your score geekbench is high or not , with two pstate?

 

My Geekbench (64bits) scores are very high, up to 12000, higher than my 'old' X58 i7 950 (MacPro5,1).

It's Amazing!!

 

-U need to make a custom SSDT for your cpu since u got it OCed

-In order to get more than 2 Pstates you need to follow my little guide above.

-EthernetBuiltIn you don't need this with my DSDT i have it patched.

-darkwake=0 you don't need this either

 

Thanks Djey, I follow your guide and I edit IOPlatformPluginFamily.kext.

I try to use last ###### SSDTs, but don't work, only 2 states.

Link to comment
Share on other sites

 Share

×
×
  • Create New...