problems with booting dvd image

[kb9qkc]

i did everything like i read on forums i got the patched dvd iso of macosx 10.4.9 it burned fine well then i made a parition after my windows parition made it 10 gigs and made it a fat32 filesystem made it primary active i go and stick the dvd into the drive and restart pc and yes i have dvd boot enabled in bios it act likes it gonna boot to the installation but it stops and all i get is a black screen with a E_ and thats it the pc wont do anything else i tried to hit f8 while booting but nothing.

 

its a sata harddrive that im using i got a asus p5e motherboard i forgot what controller has on it its a intel chipset x38

[kb9qkc]

well i reburnt dvd image at slowest speed i could and gonna see if that helps my problem if not im gonna try to get a ide hard drive and see if that helps i guess.

 

edited

that didnt work either i put a single ide hard drive in that was partitiond like the directons say i unhooked the sata drives and made the ide the only drive and the dvd was burnt at lowest speed nero let me burn it wich was 4x i dont know what else to do now no one else ever had the black screen come up with a E_ on the left hand side and the pc hangs darwin dont even come up yet thats trying to boot from installation cd of 10.4.9

[Reveeen]

Sadly, there are some that simply won't boot OSx86 on CD, I have one here that simply refuses (P4R800VM).

 

My options seem to be:

1) forget it and continue to run Windoze

2) pre-load the hardrive with the suitable drivers on another computer that WILL boot the CD, then before re-start swap the hardrive into the computer you wish to run OSx on.

 

Sorry I can't be of more help.