deesto Posted July 7, 2007 Share Posted July 7, 2007 I'm trying to figure out what options will work with my system (if any). Here are a few of the methods I've tried, and the results... I hope someone can help troubleshoot: Install attempt #1: Disk target: partition on IDE drive Image: 10.4.9.AMD Kernel: AMD SSE3 Patches: AppleACPIPlatform.kext Remove Thermal kexts Verbose Mode VGA: Nvidia: Natit 0.2, Titan nForce SATA USB Azalia Audio Result: installation failed; stopped at 31% (10 minutes remaining, although the time remaining didn't change much during the process); saw the following errors in the log: CODEBurnfileError1: Operation not permitted -/volumes/macosx 1/System/Library/CoreServices/BootX Install failed: Some files for 10.4.9.AMD.tubgirl may not have been written successfully Also errors about SPPrefPaneReporter and SPAirPortReporter: Reason: image not found Install attempt #2: Disk target: IDE drive (full disk, one partition) Image: 10.4.9.AMD Kernel: Universal Kernel 3 Patches: none. Result: installation completed successfully; system rebooted, and I used my BIOS to boot from the IDE drive; OS began to boot, and I saw the grey Apple logo and the circular progress meter... and that's how my system remained until 8 hours later, when I turned it off. It never actually finished booting into the OS. I noticed this error while the DVD booted before the install: CODEcopy AirportSCPPrefsRef: commit preferences: No such key (My apologies if any of the errors are not completely accurate; I copied them down to paper as fast as I could.) My computer: System: Gateway GT5426E Motherboard: ECS MCP61-P AM2 Chipset: MCP61P, GeForce 6100 NVIDIA nForce 430 CPU: AMD Athlon 64 Processor X2 5200+ Disk (main): Hitachi 320 GB 7200 RPM SATA II Disk (aux.): IDE 80 GB (used for this installation) Disk (aux.): USB 250 GB Memory: 2048 MB DDR2, 533 MHz, (PC4200) More info: http://support.gateway.com/s/pc/R/1009452/1009452nv.shtml Thanks for your help. Link to comment https://www.insanelymac.com/forum/topic/56445-endless-boot-progress-meter-after-uphuck-13-install/ Share on other sites More sharing options...
deesto Posted July 7, 2007 Author Share Posted July 7, 2007 I also have these results to report on my system: Installed on single-partition IDE drive, with AMD 3 kernel and no patches. Result: endless boot (apple logo with circular progress meter for hours) Installed on single-partition IDE drive, with AMD 3 kernel and all AMD-related patches. Result: error on boot:System config file '/com.apple.boot.plist' not found Link to comment https://www.insanelymac.com/forum/topic/56445-endless-boot-progress-meter-after-uphuck-13-install/#findComment-403497 Share on other sites More sharing options...
Recommended Posts