Willydayan Posted March 21, 2007 Share Posted March 21, 2007 Hello, I'm trying to install mac OSX X86 ( ISO Name: JaS.10.4.8.SSE3.Intel.Only.iso} found on Demonid) and when I boot from disc I get that gray apple for about 13 seconds then a blank screen (I waited for 1 hour before shuting off) so I thought it was may be the ISO so I tryed booting it on my desk top it work so I was like So I disabled my dual core in my bios, thinkin that work fix it, NOPE! Heres my System orginal comfig 2Y5522DUAL IN-LINE MEMORY MODULE, 512MB, 533, 64X64, 8K, 2001UD264BATTERY, PRIMARY, 13.2V, 6C, LITHIUM, SANYO1GH766ASSEMBLY, DVD+/-RW, 8X, PHILIPS, SULLIVAN/TOBAGO1DF056LIQUID CRYSTAL DISPLAY, 15.4WXGA, VIDEO ELEC. STDS. ASSOC., GLARE WIDE VIEWING ANGLE, SAMSUNG1NF882BEZEL, ASSEMBLY, PLASTIC, LIQUID CRYSTAL DISPLAY, 15.4, 64001UF167ASSEMBLY, CABLE, COAXIAL, LIQUID CRYSTAL DISPLAY, 15.4, 64001KD882ASSEMBLY, BASE (ASSEMBLY OR GROUP), NOTEBOOK, UNIFIED MEMORY ARCHITECTURE, 64001WH798HARD DRIVE, 100G, Serial ATA, 9, 54, FUJITSU, M60+1CD940KIT, SOFTWARE, WORDPERFECT, 12, PLUS-TRIAL1NC293CARD (CIRCUIT), NETWORK, MINICARD, 3945ULD, DELL AMERICAS ORGANIZATION1CF745ASSEMBLY, ADAPTER, ALTERNATING CURRENT, 65W, MOBILE 2007, DELTA - AC ADAPT, WORLD WIDE1X9799PROCESSOR, 80539, YONAH, T2300, 1.66, C01DF771CORD, POWER, 125, 1M, C7, 2P, DUAL, UNITED STATES1NC929KEYBOARD, 87, UNITED STATES, ENGLAND/ENGLISH, SINGLE POINTING, D PLUS SERIES Heres my System from EVERSESTField ValueCPU Properties CPU Type Mobile Intel Core Solo T1300 CPU Alias Yonah CPU Stepping C0 Engineering Sample No CPUID CPU Name Genuine Intel® CPU T2300 @ 1.66GHz CPUID Revision 000006E8h Core Voltage 0.950 V CPU Speed CPU Clock 997.5 MHz (original: [ TRIAL VERSION ] MHz) CPU Multiplier 6.0x CPU FSB 166.3 MHz (original: 166 MHz) Memory Bus 266.0 MHz DRAM:FSB Ratio 8:5 CPU Cache L1 Code Cache 32 KB L1 Data Cache [ TRIAL VERSION ] L2 Cache 2 MB (On-Die, ATC, Full-Speed) Motherboard Properties Motherboard ID <DMI> Motherboard Name Dell Inspiron 6400/E1505 Chipset Properties Motherboard Chipset Mobile Intel Calistoga-G i945GM Memory Timings 4-4-4-12 (CL-RCD-RP-RAS) SPD Memory Modules DIMM1: MALABS 1 GB DDR2-533 DDR2 SDRAM (5-4-4-11 @ 266 MHz) (4-4-4-11 @ 266 MHz) (3-3-3-8 @ 200 MHz) DIMM3: Hyundai HYMP564S64P6-C4 [ TRIAL VERSION ] BIOS Properties System BIOS Date 09/29/06 Video BIOS Date Unknown DMI BIOS Version A09 Graphics Processor Properties Video Adapter Intel 82945GM Graphics Controller 0 [A-3] GPU Code Name Calistoga-GM (Integrated 8086 / 27A2, Rev 03) GPU Clock 250 MHz And heres the CPU Field Value CPU Properties CPU Type Mobile Intel Core Solo T1300, 1666 MHz (10 x 167) CPU Alias Yonah CPU Stepping C0 Instruction Set x86, MMX, SSE, SSE2, SSE3 Original Clock [ TRIAL VERSION ] Min / Max CPU Multiplier 6x / 10x Engineering Sample No L1 Code Cache 32 KB L1 Data Cache [ TRIAL VERSION ] L2 Cache 2 MB (On-Die, ATC, Full-Speed) CPU Physical Info Package Type 479 Ball uFCBGA / 478 Pin uFCPGA Transistors [ TRIAL VERSION ] million Process Technology 65 nm, CMOS, Cu, Low-K Inter-Layer, High-K Gate, Strained Si Die Size [ TRIAL VERSION ] mm2 Core Voltage 0.950 - 1.262 V I/O Voltage 0.950 - 1.262 V CPU Manufacturer Company Name Intel Corporation Product Information http://www.intel.com/products/processor CPU Utilization CPU #1 21 % Please note my dual core is disabled right now! So can you guys help me out? And also if you one of you guys can help out real time heres my msn willy@willysite.net Link to comment https://www.insanelymac.com/forum/topic/45930-problems-installing-on-e1505/ Share on other sites More sharing options...
Willydayan Posted March 21, 2007 Author Share Posted March 21, 2007 Well I got it installed and working but my sound, wireless, Broadcom Enithernet Still don't work Link to comment https://www.insanelymac.com/forum/topic/45930-problems-installing-on-e1505/#findComment-328875 Share on other sites More sharing options...
Recommended Posts