LooseChange Posted March 5, 2007 Share Posted March 5, 2007 Hi everyone, I have a quick question that will hopefully be easy to answer. I'm running a rig I built, and am trying to get OS X on it with the jas 10.4.6 install dvd. DVD: It's a DVD+R and I just burned the iso to it using a freeware app called Burn4free. The disc booted on an old Dell I have, although I couldn't read anything on the screen - not sure if that was just a display issue? I'm assuming it was something along those lines and that the dvd works. Hardware: Board: Intel DG965RY --> Intel® G965 Express Chipset --> 6-channel (5.1) audio subsystem using the SigmaTel* STAC9227 audio codec --> Intel® Graphics Media Accelerator X3000 (Intel® GMA X3000) onboard graphics subsystem CPU: Intel Core 2 Duo E6400 2.13GHz, SSE3 Capable Also, Sony DRU 800a DVD drive, Seagate 160gb hdd **Let me know if more info is needed about the hardware Problem: After partitioning the hdd and booting with the Jas DVD, Darwin starts to load and then when the grey screen with the apple logo comes up, it hangs there without even showing the spinning circle thing at the bottom of the screen like it did on my Dell. When I boot with the -v option this is what comes up, then it hangs: hi mem tramps at 0xffe00000 PAE enabled standard timeslicing quantum is 10000 us vm_page_bootstrap: 247755 free pages mig_table_max_displ = 71 CPU identification: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ASPCI MMX FXSR SSE SSE2 SS HTT TM EST HTT: 2 Cores per package; 2 logical cpus per package CPU extended features: XD EM64T Enabling XXM register save/restore and SSE/SSE2 opcodes [RTCLOCK] frequency 2130000000 (2131208300) ACPI CA 20051117 [debug level=0 layer=0] AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. using 2554 buffer headers and 2554 cluster IO buffer headers Eanbling XMM register save/restore and SSE/SSE2 opcodes Started CPU 01 IOAPIC: Version 0x20 Vectors 0:23 ACPI: System State [SO S3 S4 S5] (S3) Security auditing service present BSM auditing present disabled From path: "uuid", Waiting for boot volume with UUID 732B1B37-E75B-3115-8B90-5011C6E7A10B Waiting on <dict ID="0"><key><IOProviderCloass></key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1 Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 I'm completely new to this, so for all I know it is something as simple as enabling/disabling something in my bios. I tried sifting through the wiki and searching old posts to find a possible answer, but honestly I'm not quite sure what I'm looking for. I did find something in the wiki that mentioned success with a board similar to mine took converting a parallel dvd drive to USB, so I took the converter out of my external hdd enclosure and hooked my dvd drive up that way, same problem. Sorry if I had to waste anyone's time with an easy problem, I messed with this for most of the day before I bugged you all. Any suggestions will be appreciated Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/ Share on other sites More sharing options...
jnavarro Posted March 6, 2007 Share Posted March 6, 2007 i have the same problem...if you find any solution, please tell me thanks Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/#findComment-317436 Share on other sites More sharing options...
LooseChange Posted March 6, 2007 Author Share Posted March 6, 2007 If anyone has any suggestions, I would really appreciate it. Just finger in the right direction would really help. Thanks everyone. Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/#findComment-317684 Share on other sites More sharing options...
Virgo Posted March 13, 2007 Share Posted March 13, 2007 You must use DVD SATA, external video (internal video not work). P.S. Intel DQ965GF. Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/#findComment-322750 Share on other sites More sharing options...
gawdemmet Posted April 13, 2007 Share Posted April 13, 2007 it does work according to this guy TPM can be disabled in the BIOS. so that isn't the issue. this seems to be an issue with the 965 chipset in general. basically, your install DVD needs to be in the same SATA controller as your Hard drive. Or in a USB enclosure. But it won't install or see your SATA drives if you install from an IDE DVD-ROM. Great ain't it? Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/#findComment-345950 Share on other sites More sharing options...
P3TROW Posted June 9, 2007 Share Posted June 9, 2007 I have a similar problem. Darwin runs well and the apple screen appears with the load circle, but it simply doesn't load at all, so i can't install it!! So what can i do to overcome this? tks Link to comment https://www.insanelymac.com/forum/topic/44341-jas-1046-install-dvd-wont-load-up/#findComment-380818 Share on other sites More sharing options...
Recommended Posts